Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-05-14 11:41:20
From: Armin Wolfermann
Description: Intel 443BX, Adaptec 2100S and 2940, OpenBSD 3.7-current
OpenBSD 3.7-current (GENERIC) #74: Thu Apr 14 18:44:09 MDT 2005
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 802 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073311744 (1048156K)
avail mem = 972865536 (950064K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(5c) BIOS, date 03/03/00, BIOS32 rev. 0 @ 0xf0520
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d10/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xd0000/0x800 0xd4000/0x6000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Vanta" rev 0x15
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 15
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 4 function 3 not configured
ahc1 at pci0 dev 6 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: irq 15
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM, DDYS-T18350M, S93E> SCSI3 0/direct fixed
sd0: 17501MB, 15110 cyl, 6 head, 395 sec, 512 bytes/sec, 35843670 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM, DDYS-T36950M, S80D> SCSI3 0/direct fixed
sd1: 35003MB, 15110 cyl, 12 head, 395 sec, 512 bytes/sec, 71687340 sec total
cd0 at scsibus0 targ 4 lun 0: <TEAC, CD-ROM CD-532S, 1.0A> SCSI2 5/cdrom removable
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 15 address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal phy
xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10, address [_MAC_XXXXXXXXXX]
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
ppb1 at pci0 dev 11 function 0 "DPT PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
iop0 at pci0 dev 11 function 1 "DPT SmartRAID (I2O)" rev 0x02: I2O adapter <ADAPTEC 2100S>
iop0: interrupting at irq 12
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb65 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
iop0: configuring...
ioprbs0 at iop0 tid 519: <ADAPTEC, RAID-5, 370F> direct access, fixed
scsibus1 at ioprbs0: 1 targets
sd2 at scsibus1 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd2: 35002MB, 8889 cyl, 128 head, 63 sec, 512 bytes/sec, 71684096 sec total
device (class 0x80) at iop0 tid 8 not configured
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 40.0MHz, offset = 0x3f
dkcsum: sd0 matched BIOS disk 80
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 40.0MHz, offset = 0x3f
dkcsum: sd1 matched BIOS disk 81
dkcsum: sd2 matched BIOS disk 82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02