Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-06-03 10:17:06
From: Chris Buechler
Description: Dell PowerEdge 2550, dual PIII 1.26 GHz, 2 GB RAM, PERC 3/Di SCSI RAID. Multipurpose server, FreeBSD 5.4.
Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p1 #1: Wed May 25 14:33:49 EDT 2005 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/SERVER Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1263.45-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147418112 (2047 MB) avail memory = 2100166656 (2002 MB) ACPI APIC Table: <DELL PE2550 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Changing APIC ID to 2 ioapic1: Changing APIC ID to 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE2550> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 14.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x8a0-0x8af at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7102> mem 0xfeb00000-0xfeb0ffff irq 17 at device 8.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: [_MAC_XXXXXXXXXX] pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci3: <mass storage, SCSI> at device 4.0 (no driver attached) ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 30 at device 4.1 on pci3 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 31 at device 2.1 on pci2 aac0: i960RX 100MHz, 118MB cache memory, optional battery present aac0: Kernel 2.6-0, Build 3512, S/N 2821d2 aac0: Supported Options=0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 16 at device 4.0 on pci2 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: [_MAC_XXXXXXXXXX] fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <SAMSUNG CD-ROM SN-124/q009> at ata0-master PIO4 Waiting 3 seconds for SCSI devices to settle aacd0: <RAID 1 (Mirror)> on aac0 aacd0: 34712MB (71091456 sectors) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/aacd0s1a