Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-06-23 20:00:04
From: sthen
Description: Netra T1 105, OpenBSD 3.7
N.B. The PCI slot on the Netra T1 doesn`t work in OpenBSD (at least as of June 2005). console is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.7-current (GENERIC) #489: Fri Jun 3 23:02:53 MDT 2005 xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 1073741824 avail memory = 970104832 using 6553 buffers containing 53682176 bytes of memory bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0 mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.047 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc0000 SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0 DVMA map: c0000000 to e0000000 IOTDB: 52f2000 to 5372000 pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power at ebus0 addr 724000-724003 ipl 37 not configured SUNW,pll at ebus0 addr 504000-504002 not configured com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo com0: console com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34: polled fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not configured clock1 at ebus0 addr 0-1fff: mk48t59: hostid xxxxxxxx flashprom at ebus0 addr 0-fffff not configured watchdog at ebus0 addr 200000-20003f ipl 4 not configured display7seg at ebus0 addr 200040-200040 not configured beeper0 at ebus0 addr 722000-722003: can`t map register space flashprom at ebus0 addr 400000-5fffff not configured flashprom at ebus0 addr 800000-9fffff not configured i2c at ebus0 addr 600000-600003 ipl 40 not configured i2c at ebus0 addr 100000-100003 ipl 27 not configured SUNW,lom at ebus0 addr 400000-400063 not configured hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address xx:xx:xx:xx:xx:xx luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1 hme0: using ivec 3021 for interrupt siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec 1820, using 4K of on-board RAM scsibus0 at siop0: 16 targets sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318404LSUN18G, 5221> SCSI3 0/direct fixed sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST318305LSUN18G, 0340> SCSI3 0/direct fixed sd1: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: address xx:xx:xx:xx:xx:xx luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1 hme1: using ivec 301a for interrupt ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2 ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x06 pci3 at ppb2 bus 3 pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 1802 for native-PCI interrupt pciide0: channel 0 disabled (no drives) atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1111> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 pcons at mainbus0 not configured No counter-timer -- using %tick at 440MHz as system clock. root on sd0a siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers rootdev=0x700 rrootdev=0x1100 rawdev=0x1102 siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers