Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-07-05 18:03:43
From: markus
Description: OpenBSD 3.7, VIA Epia M10000 w/o additional hardware
OpenBSD 3.7-stable (GENERIC) #0: Tue Jul 5 04:09:48 CEST 2005 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 1 GHz cpu0: FPU,DE,PSE,TSC,MSR,MTRR,PGE,CMOV,MMX,FXSR,SSE cpu0: RNG real mem = 234397696 (228904K) avail mem = 207130624 (202276K) using 2886 buffers containing 11821056 bytes (11544K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(68) BIOS, date 12/11/03, BIOS32 rev. 0 @ 0xfb210 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/112 (5 entries) pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xfa00 0xd0000/0xa000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xd8000000, size 0x10000000 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "VIA VT6306 FireWire" rev 0x80 at pci0 dev 13 function 0 not configured uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00 pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <IC35L060AVVA07-0> wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10 ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address xx:xx:xx:xx:xx:xx ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x004063, model 0x0032, rev. 8 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask ef65 netmask ef65 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302