Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-07-10 21:53:45
From: Fred Noz
Description: P3 500 MHz, many NICs including Dlink 550TX 4-port Samsung CD-RW (firewall)
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 501 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS R,SSE real mem = 335110144 (327256K) avail mem = 264757248 (258552K) using 4278 buffers containing 50577408 bytes (49392K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(d9) BIOS, date 08/07/99, BIOS32 rev. 0 @ 0xf06b0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xf0000/0xf12 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0e70/160 (8 entries) pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xcc000/0x1000 0xd0000/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "S3 Trio3 DX2" rev 0x02 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wi red to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <Maxtor 92049U6> wd0: 16-sector PIO, LBA, 19473MB, 39882528 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-R/RW SW-248F, R601> SCSI0 5/cdrom rem ovable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 4 function 3 not configured fxp0 at pci0 dev 9 function 0 "Intel 82557" rev 0x08, i82559: irq 9, address 00: 90:27:5b:d8:45 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 fxp1 at pci0 dev 10 function 0 "Intel 82557" rev 0x08, i82559: irq 5, address 00 :90:27:5b:e2:00 inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4 fxp2 at pci0 dev 11 function 0 "Intel 82557" rev 0x08, i82559: irq 10, address 0 0:90:27:55:e6:0f inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4 ppb1 at pci0 dev 12 function 0 "Intel S21152BB PCI-PCI" rev 0x00 pci2 at ppb1 bus 2 ste0 at pci2 dev 4 function 0 "D-Link Systems 550TX" rev 0x12: irq 11 address 00 :05:5d:e6:37:4d ukphy0 at ste0 phy 0: Generic IEEE 802.3u media interface ukphy0: OUI 0x000885, model 0x0023, rev. 0 ukphy1 at ste0 phy 1: Generic IEEE 802.3u media interface ukphy1: OUI 0x000885, model 0x0023, rev. 0 ste1 at pci2 dev 5 function 0 "D-Link Systems 550TX" rev 0x12: irq 10 address 00 :05:5d:e6:37:4e ukphy2 at ste1 phy 0: Generic IEEE 802.3u media interface ukphy2: OUI 0x000885, model 0x0023, rev. 0 ukphy3 at ste1 phy 1: Generic IEEE 802.3u media interface ukphy3: OUI 0x000885, model 0x0023, rev. 0 ste2 at pci2 dev 6 function 0 "D-Link Systems 550TX" rev 0x12: irq 5 address 00: 05:5d:e6:37:4f ukphy4 at ste2 phy 0: Generic IEEE 802.3u media interface ukphy4: OUI 0x000885, model 0x0023, rev. 0 ukphy5 at ste2 phy 1: Generic IEEE 802.3u media interface ukphy5: OUI 0x000885, model 0x0023, rev. 0 ste3 at pci2 dev 7 function 0 "D-Link Systems 550TX" rev 0x12: irq 9 address 00: 05:5d:e6:37:50 ukphy6 at ste3 phy 0: Generic IEEE 802.3u media interface ukphy6: OUI 0x000885, model 0x0023, rev. 0 ukphy7 at ste3 phy 1: Generic IEEE 802.3u media interface ukphy7: OUI 0x000885, model 0x0023, rev. 0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask e345 netmask ef65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 ste3: full-duplex ste3: full-duplex