Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2005-07-18 03:54:28
From: Mark Felskowski
Description: Pentium 100MHz 486DX, 1.2GB HDD Seagate, D-Link NIC, Matrox MGA Impression
NetBSD 2.0.2 (GENERIC) #0: Wed Mar 23 08:53:42 UTC 2005
total memory = 15996 KB
avail memory = 7940 KB
BIOS32 rev. 0 found at 0xfdb70
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium (P54C) (586-class), 99.61 MHz, id 0x526
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437VX System Controller (TVX) (rev. 0x02)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
vr0 at pci0 dev 9 function 0: VIA VT6105 (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 10 function 0: Matrox MGA Impression (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
ym0 at isapnp0 port 0x220/16,0x530/8,0x388/4,0x330/2,0x370/2 irq 5 drq 0,1
ym0: OPL3-SAX Sound Board : OPL3-SA3
audio0 at ym0: full duplex, mmap
opl0 at ym0: model OPL3
midi1 at opl0: OPL3-SA3 Yamaha OPL3
mpu0 at ym0
midi2 at mpu0: OPL3-SA3 MPU-401 MIDI UART
joy0 at isapnp0 port 0x201/1
joy0: OPL3-SAX Sound Board 
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Seagate Technology 1275MB - ST31276A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1221 MB, 2482 cyl, 16 head, 63 sec, 512 bytes/sect x 2502308 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)