Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-12-04 20:16:10
From: Xavier
Description: Dell Inspiron 3000 (floppy install over Linksys USB200M USB NIC)
NetBSD 3.0_BETA (GENERIC_LAPTOP) #0: Sat Aug 13 13:31:40 UTC 2005 [_EMAIL_XXXXXXXXXXXXXX]:/home/builds/ab/netbsd-3/i386/200508120000Z-obj/home/builds/ab/netbsd-3/src/sys/arch/i386/compile/GENERIC_LAPTOP total memory = 143 MB avail memory = 134 MB BIOS32 rev. 0 found at 0xfd800 PCI BIOS rev. 2.1 found at 0xfda1a pcibios: config mechanism [1][x], special cycles [x][x], last bus 0 PCI IRQ Routing Table rev. 1.0 found at 0xfdf90, size 80 bytes (3 entries) PCI Interrupt Router at 000:01:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible) ------------------------------------------ device vendor product pin PIRQ IRQ stage ------------------------------------------ 000:01:2 0x8086 0x7112 D 0x03 10 1 fixed up 000:04:0 0x104c 0xac15 A 0x00 11 1 fixed up 000:04:1 0x104c 0xac15 B 0x01 11 1 fixed up ------------------------------------------ PCI fixup examining 8086:7100 PCI fixup examining 8086:7110 PCI fixup examining 8086:7111 PCI fixup examining 8086:7112 PCI fixup examining 8086:7113 PCI fixup examining 10c8:04 PCI fixup examining 104c:ac15 PCI bridge 0: primary 0, secondary 1, subordinate 1 PCI fixup examining 104c:ac15 PCI bridge 1: primary 0, secondary 2, subordinate 2 PCI bus #2 is the last bus [System BIOS Setting]----------------------- device vendor product register space address size -------------------------------------------- 000:00:0 0x8086 0x7100 [OK] 000:01:0 0x8086 0x7110 [OK] 000:01:1 0x8086 0x7111 20h port 0x0000fcf0 0x00000010 [OK] 000:01:2 0x8086 0x7112 20h port 0x0000fcc0 0x00000020 [OK] 000:01:3 0x8086 0x7113 [OK] 000:02:0 0x10c8 0x0004 10h mem 0xfd000000 0x01000000 14h mem 0xfea00000 0x00200000 18h mem 0xfed00000 0x00100000 [OK] 000:04:0 0x104c 0xac15 10h mem 0x00000000 0x00001000 [NG] 000:04:1 0x104c 0xac15 10h mem 0x00000000 0x00001000 [NG] --------------------------[ 2 devices bogus] Physical memory end: 0x08ffc000 PCI memory mapped I/O space start: 0x09000000 [PCIBIOS fixup stage]----------------------- device vendor product register space address size -------------------------------------------- 000:00:0 0x8086 0x7100 [OK] 000:01:0 0x8086 0x7110 [OK] 000:01:1 0x8086 0x7111 20h port 0x0000fcf0 0x00000010 [OK] 000:01:2 0x8086 0x7112 20h port 0x0000fcc0 0x00000020 [OK] 000:01:3 0x8086 0x7113 [OK] 000:02:0 0x10c8 0x0004 10h mem 0xfd000000 0x01000000 14h mem 0xfea00000 0x00200000 18h mem 0xfed00000 0x00100000 [OK] 000:04:0 0x104c 0xac15 10h mem 0x09000000 0x00001000 [OK] 000:04:1 0x104c 0xac15 10h mem 0x09001000 0x00001000 [OK] --------------------------[ 0 devices bogus] mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium/MMX (Tillamook) (586-class), 200.46 MHz, id 0x581 cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> cpu0: features 8001bf<MMX> pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82439TX (MTXC) System Controller (rev. 0x01) pcib0 at pci0 dev 1 function 0 pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x01) piixide0 at pci0 dev 1 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel ignored (disabled) uhci0 at pci0 dev 1 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01) uhci0: interrupting at irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge, revision 0x01) at pci0 dev 1 function 3 not configured vga1 at pci0 dev 2 function 0: Neomagic MagicGraph 128XD (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 cbb0 at pci0 dev 4 function 0: Texas Instruments PCI1131 PCI-CardBus Bridge (rev. 0x01) cbb1 at pci0 dev 4 function 1: Texas Instruments PCI1131 PCI-CardBus Bridge (rev. 0x01) isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pms0: Synaptics touchpad version 3.4 pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 1 device 0 pcmcia0 at cardslot0 cbb1: interrupting at irq 11 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 2 device 0 pcmcia1 at cardslot1 apm0 at mainbus0: Power Management spec V1.2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated axe0 at uhub0 port 1 configuration 1 interface 0 axe0: Linksys USB 2.0 10/100 ethernet controller, rev 2.00/0.01, addr 2 axe0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at axe0 phy 3: Generic IEEE 802.3u media interface ukphy0: OUI 0x000004, model 0x0020, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wd0 at atabus0 drive 0: <IBM-DTCA-24090> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 3909 MB, 7944 cyl, 16 head, 63 sec, 512 bytes/sect x 8007552 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)