Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-12-31 03:20:01
From: adli
Description: OpenBSD 3.6 on Pentium Celeron 468MHz, 32MB RAM, - running as home router/fw/ids
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 468 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS R
real mem = 32088064 (31336K)
avail mem = 21282816 (20784K)
using 417 buffers containing 1708032 bytes (1668K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(28) BIOS, date 03/13/00, BIOS32 rev. 0 @ 0xfb0b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb530
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd70/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810" rev 0x03: rng active, 9Kb/sec
vga1 at pci0 dev 1 function 0 "Intel 82810 Graphics" rev 0x03: aperture at 0xd00 00000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
rl0 at pci1 dev 1 function 0 "D-Link Systems 530TX+" rev 0x10: irq 12 address 00 :0d:88:39:4d:43
rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci1 dev 7 function 0 "D-Link Systems 530TX+" rev 0x10: irq 11 address 00 :0d:88:39:27:06
rlphy1 at rl1 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 w ired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST310212A>
wd0: 32-sector PIO, LBA, 9768MB, 20005650 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-50MAX, 50MT> SCSI0 5/cdrom re movable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 12, ICH AC97
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
mpu0 at isa0 port 0x300/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302