Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2006-01-19 09:04:35
From: Richard Bejtlich
Description: Dell PowerEdge 2300 dual PIII 500 MHz server running FreeBSD 6.0 STABLE with kernel rebuilt for SMP, with Seagate STT8000A Tape Drive, Adaptec DuoConnect PCI Adapter for FireWire and USB 2.0, and 100 MB IDE Zip
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Wed Jan 18 22:47:42 EST 2006
ACPI APIC Table: <DELL   PE2300  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (498.75-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
real memory  = 536862720 (511 MB)
avail memory = 515825664 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE2300> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0
 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem 0xf9fff000
-0xf9ffffff irq 16 at device 4.0 on pci2
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xf9ffe000-0xf
9ffefff irq 16 at device 6.0 on pci2
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcib3: <PCI-PCI bridge> at device 10.0 on pci2
pci3: <PCI bus> on pcib3
amr0: <LSILogic MegaRAID 1.51> mem 0xf3c00000-0xf3ffffff irq 18 at device 10.1 on pci2
amr0: <Series 466> Firmware 3.13, BIOS 1.43, 16MB RAM
pci2: <multimedia, audio> at device 13.0 (no driver attached)
pci2: <simple comms> at device 13.1 (no driver attached)
pci2: <input device> at device 13.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
atapci1: <Promise PDC20262 UDMA66 controller> port 0xdcf8-0xdcff,0xdcf0-0xdcf3,0
xdce0-0xdce7,0xdcd8-0xdcdb,0xdc80-0xdcbf mem 0xfe100000-0xfe11ffff irq 20 at dev
ice 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc40-0xdc7f mem 0xfe120000-0xfe120ff
f,0xfe000000-0xfe0fffff irq 21 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: xx:xx:xx:xx:xx:xx
pcib4: <PCI-PCI bridge> at device 12.0 on pci0
pci4: <PCI bus> on pcib4
ohci0: <NEC uPD 9210 USB controller> mem 0xf7fff000-0xf7ffffff irq 22 at device 
8.0 on pci4
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xf7ffe000-0xf7ffefff irq 21 at device 
8.1 on pci4
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xf7ffdc00-0xf7ffdcff irq 20 at device 8.2 on pci4
usb3: EHCI version 0.95
usb3: companion controllers, 3 ports each: usb1 usb2
usb3: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
fwohci0: <Texas Instruments TSB43AB23> mem 0xf7ffd000-0xf7ffd7ff,0xf7ff8000-0xf7
ffbfff irq 22 at device 12.0 on pci4
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:0d:af
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd880-0xd8ff mem 0xfe121000-0xfe12
107f irq 17 at device 14.0 on pci0
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc8fff
,0xc9000-0xc9fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ast0: TAPE <Seagate STT8000A/5.02> at ata2-slave PIO4
afd0: REMOVABLE <IOMEGA ZIP 100 ATAPI/23.D> at ata3-master PIO0
Waiting 5 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 25704MB (52641792 sectors) RAID 0 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x6 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device 
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/amrd0s1a