Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2006-01-26 10:49:30
From: sthen
Description: Apple Mac Mini, OpenBSD 3.8-current snapshot (2006-01-07)
[ using 335252 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A]console in [M-6M-[mM-6M-[mM-6M-[] no keyboard found, hoping USB will be present
using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 800 linebytes 1024 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8-current (GENERIC) #809: Sat Jan 7 19:53:45 MST 2006
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (524288K)
avail mem = 483102720 (471780K)
using 1254 buffers containing 26841088 bytes (26212K) of memory
mainbus0 (root): model PowerMac10,1
cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache
memc0 at mainbus0: uni-n
hw-clock at memc0 not configured
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
"cereal" at iic0 addr 0xe0 not configured
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
find_node_intr unable to find step size
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
modem-reset at macgpio0 offset 0x1d not configured
modem-power at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9 irq 47
programmer-switch at macgpio0 offset 0x11 not configured
gpio5 at macgpio0 offset 0x6f not configured
gpio6 at macgpio0 offset 0x70 not configured
extint-gpio15 at macgpio0 offset 0x67 not configured
escc-legacy at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
timer at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x0, 0% charged
pi2c0 at adb0
iic1 at pi2c0
maxtmp0 at iic1 addr 0xc8: max6642
ki2c1 at macobio0 offset 0x18000
iic2 at ki2c1
"cereal" at iic2 addr 0xe0 not configured
wdc0 at macobio0 offset 0x20000 irq 24: DMA
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
usb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
usb4 at ohci4: USB revision 1.0
uhub4 at usb4
uhub4: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb5 at ehci0: USB revision 2.0
uhub5 at usb5
uhub5: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <ST940110A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at wdc1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> SCSI0 5/cdrom removable
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address [_MAC_XXXXXXXXXX]
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
bootpath: `/pci@f4000000/ata-6@d/disk@0/bsd`
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02