Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2006-01-26 14:47:04
From: bsdlist
Description: Sun Netra t1 105
OpenBSD 3.9-beta (GENERIC) #746: Thu Jan 19 04:11:55 MST 2006
total memory = 536870912
avail memory = 479354880
using 3276 buffers containing 26836992 bytes of memory
bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0
mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.051 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: 26a8000 to 2728000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34: polled
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock1 at ebus0 addr 0-1fff: mk48t59: [_HOSTID_XXXXX]
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 27 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 3021, address [_MAC_XXXXXXXXXX]
luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec 1820, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS15K2_36SCA, JNZ6> SCSI3 0/direct fixed
sd0: 34732MB, 48242 cyl, 2 head, 737 sec, 512 bytes/sec, 71132959 sec total
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 301a, address [_MAC_XXXXXXXXXX]
luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 1802 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1107> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
root on sd0a
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102