Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2006-01-27 13:35:41
From: jared rr spiegel
Description: HP Netserver LD Pro/600, OpenBSD 3.8-current (GENERIC) #318: Fri Dec 16 12:25:46 MST 2005
OpenBSD 3.8-current (GENERIC) #318: Fri Dec 16 12:25:46 MST 2005
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
real mem = 536453120 (523880K)
avail mem = 229134336 (223764K)
using 4278 buffers containing 280363008 bytes (273792K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(3b) BIOS, date 06/10/98, BIOS32 rev. 0 @ 0xf5d57
pcibios0 at bios0: rev 2.1 @ 0xf5b70/0x1120
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x800 0xcc800/0x1800 0xce000/0x1800
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
ami0 at pci0 dev 7 function 0 "AMI MegaRAID Series 428" rev 0x03: irq 11 AMI 428 32b
ami0: FW A.04.03, BIOS vA.04.03, 32MB RAM
ami0: 3 channels, 16 targets, 1 logical drives
scsibus0 at ami0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34730MB, 34730 cyl, 64 head, 32 sec, 512 bytes/sec, 71127040 sec total
ppb0 at pci0 dev 8 function 0 "DEC 21052 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 82557" rev 0x10, i82551: irq 15, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 2 function 0 "Intel 82557" rev 0x10, i82551: irq 9, address [_MAC_XXXXXXXXXX]
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci1 dev 3 function 0 "Intel 82557" rev 0x02: irq 10, address [_MAC_XXXXXXXXXX]
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 0
"Intel 82375EB EISA" rev 0x15 at pci0 dev 9 function 0 not configured
ahc0 at pci0 dev 10 function 0 "Adaptec AIC-7880" rev 0x00: irq 15
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus1 at ahc0: 16 targets
sd1 at scsibus1 targ 4 lun 0: <SEAGATE, ST32272N, 0784> SCSI2 0/direct fixed
sd1: 2157MB, 6300 cyl, 4 head, 175 sec, 512 bytes/sec, 4419464 sec total
cd0 at scsibus1 targ 5 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0787> SCSI2 5/cdrom removable
eisa0 at mainbus0
eisa0: can`t map I/O space for slot 14
eisa0: can`t map I/O space for slot 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f965 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x81
ahc0: target 4 synchronous at 20.0MHz, offset = 0xf
dkcsum: sd1 matches BIOS drive 0x80
root on sd1a
rootdev=0x410 rrootdev=0xd10 rawdev=0xd12