Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2006-03-17 18:33:11
From: al
Description: Athlon 1600+ / A7S333 / 2 NICs
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Dec 19 20:32:15 CET 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel /boot/kernel/kernel at 0xc0a6d000.
Preloaded elf module /boot/kernel/snd_emu10k1.ko at 0xc0a6d244.
Preloaded elf module /boot/kernel/snd_pcm.ko at 0xc0a6d2f4.
Preloaded elf module /boot/kernel/bktr.ko at 0xc0a6d3a0.
Preloaded elf module /boot/kernel/bktr_mem.ko at 0xc0a6d44c.
Preloaded elf module /boot/kernel/acpi.ko at 0xc0a6d4fc.
ACPI APIC Table: <ASUS   A7S333  >
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 1600+ (1400.06-MHz 686-class CPU)
  Origin = AuthenticAMD  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 511799296 (488 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.0> irqs 0-23 on motherboard
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7S333  > on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f1e30
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xf2800000-0xf2800fff irq 19 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xf2000000-0xf2000fff irq 23 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 745 UDMA100 controller> port 0xd800-0xd80f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 16 at device 8.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
bktr0: <BrookTree 878> mem 0xfb000000-0xfb000fff irq 17 at device 9.0 on pci0
bktr0: Hauppauge Model 44346 B109
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips SECAM tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 9.1 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xf1800000-0xf180007f irq 18 at device 10.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: <Davicom DM9102A 10/100BaseTX> port 0xa000-0xa0ff mem 0xf1000000-0xf10000ff irq 19 at device 11.0 on pci0
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5 drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter TSC frequency 1400056630 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc483bc60
ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
acd0: CDROM <GCR-8523B> at ata1-master WDMA2
acd1: DVDR <SONY DVD RW DW-U14A> at ata1-slave UDMA33
GEOM: create disk cd0 dp=0xc482de00
GEOM: create disk cd1 dp=0xc482d600
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8523B 1.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SONY DVD RW DW-U14A 1.0d> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a