Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2006-03-18 11:58:24
From: al
Description: Dell Dimension 4100 / 2*80Go RAID1 on Promise FastTrack IDE controller
NetBSD 3.0 (VENUS) #1: Fri Mar 17 17:29:40 CET 2006
root@novalis:/data/build/i386/3.0/obj/sys/arch/i386/compile/VENUS
total memory = 127 MB
avail memory = 116 MB
BIOS32 rev. 0 found at 0xfda74
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 996.83 MHz, id 0x686
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pnpbios0 at mainbus0: nodes 20, max len 242
lpt3 at pnpbios0 index 16 (PNP0400)
lpt3: io 378-37f, irq 7
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x02)
agp0 at pchb0: using generic initialization for Intel AGP
agp0: aperture at 0xf8000000, size 0x2400000
ppb0 at pci0 dev 1 function 0: Intel 82815 AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon 7500 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vr0 at pci2 dev 10 function 0: VIA VT6105 (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 3
vr0: Ethernet address: [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pdcide0 at pci2 dev 12 function 0
pdcide0: Promise Ultra100TX2v2/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using irq 9 for native-PCI interrupt
atabus0 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus1 at pdcide0 channel 1
sip0 at pci2 dev 13 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip0: interrupting at irq 11
sip0: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x02)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <IC35L080AVVA07-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0: <IC35L080AVVA07-0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(pdcide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ataraid0: found 1 RAID volume
ld0 at ataraid0 vendtype 0 Unit 0: Promise ATA RAID-1 array
ld0: 78201 MB, 9969 cyl, 255 head, 63 sec, 512 bytes/sect x 160156250 sectors
WARNING: double match for boot device (wd0, wd1)
WARNING: double match for boot device (wd0, ld0)
boot device: wd0
root on ld0a dumps on ld0b
root file system type: ffs