Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2006-06-11 08:56:39
From: herauthon
Description: Scrappy TXPro-3 / AMD-K6/2 500
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor (AuthenticAMD 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 33136640 (32360K)
avail mem = 22147072 (21628K)
using 430 buffers containing 1761280 bytes (1720K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f5) BIOS, date 12/22/98, BIOS32 rev. 0 @ 0xfafd0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb448
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd9f0/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:07:0 (VIA VT82C586 ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 VIA VT82C597 PCI rev 0x04
ppb0 at pci0 dev 1 function 0 VIA VT82C598 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 Matrox MGA G200 AGP rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 VIA VT82C586 ISA rev 0x47
pciide0 at pci0 dev 7 function 1 VIA VT82C571 IDE rev 0x06: ATA33, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST34321A>
wd0: 32-sector PIO, LBA, 4103MB, 8404830 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <WDC AC23200L>
wd1: 16-sector PIO, LBA, 3098MB, 6346368 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
VIA VT82C586 Power rev 0x10 at pci0 dev 7 function 3 not configured
rl0 at pci0 dev 10 function 0 Realtek 8139 rev 0x10: irq 10, address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 Creative ViBRA16X PnP, CTL0043, , Audio port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,3: dsp v4.16
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 Creative ViBRA16X PnP, CTL7005, PNPB02F, Game port 0x201/1
biomask fbc5 netmask ffc5 ttymask ffc7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302