Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2006-07-27 03:29:01
From: nano
Description: i386, 2 x Celeron @468MHz (SMP kernel)
OpenBSD 3.9 (GENERIC.MP) #4: Wed Jun  7 18:25:14 MSD 2006
    [_EMAIL_XXXXXXXXXXX]:/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Celeron (GenuineIntel 686-class, 128KB L2 cache) 468 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 335060992 (327208K)
avail mem = 297668608 (290692K)
using 4115 buffers containing 16855040 bytes (16460K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 04/20/00, BIOS32 rev. 0 @ 0xfb590
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xba18
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7e0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 9 10
pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371SB ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xcc000/0x5400 0xd2000/0x200! 0xef000/0x1000!
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 66 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel Celeron (GenuineIntel 686-class, 128KB L2 cache) 468 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03
ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 Matrox MGA G550 AGP rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-9 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02
pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: apic 2 int 19 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x02: polling
iic0 at piixpm0
lm1 at iic0 addr 0x2d: W83782D
ahc0 at pci0 dev 9 function 0 Adaptec AHA-19160B U160 rev 0x02: apic 2 int 19 (irq 9)
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 6 lun 0: <IBM, DDYS-T36950N, S96H> SCSI3 0/direct fixed
sd0: 35003MB, 15110 cyl, 12 head, 395 sec, 512 bytes/sec, 71687340 sec total
vr0 at pci0 dev 11 function 0 VIA VT6105 RhineIII rev 0x86: apic 2 int 18 (irq 10), address [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063, model 0x0034
rl0 at pci0 dev 13 function 0 D-Link Systems 530TX+ rev 0x10: apic 2 int 17 (irq 9), address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
pciide1 at pci0 dev 19 function 0 HighPoint HPT36x/37x IDE rev 0x01: DMA
pciide1: using apic 2 int 18 (irq 10) for native-PCI interrupt
pciide2 at pci0 dev 19 function 1 HighPoint HPT36x/37x IDE rev 0x01: DMA
pciide2: using apic 2 int 18 (irq 10) for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83782D
lm1 detached
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 AW32 Pro (R2.2-6B), CSC0000, , WSS/SB port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 AW32 Pro (R2.2-6B), CSC0001, , GAME port 0x200/8
AW32 Pro (R2.2-6B), CSC0010, , CTRL at isapnp0 port 0x120/8 not configured
mpu0 at isapnp0 AW32 Pro (R2.2-6B), CSC0003, , MPU port 0x330/2 irq 9
mpu0: find failed
biomask 0 netmask 0 ttymask 0
ioapic0: pin 18 shares different IPL interrupts (40..50), degraded performance
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
Searching for raid components...
ahc0: target 6 using 16bit transfers
ahc0: target 6 synchronous at 80.0MHz DT, offset = 0x3f
apm0: disconnected
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
umass0: Invalid CSW: tag 42 should be 43
umass0: Invalid CSW: tag 42 should be 44
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02