Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2006-10-20 11:57:06
From: jf
Description: Sun Netra T1 AC200
console is /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.9 (GENERIC) #759: Wed Mar 1 01:32:54 MST 2006
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969277440
using 6553 buffers containing 53682176 bytes of memory
bootpath: /pci@1f,0/pci@1,0/scsi@8,0/disk@0,0
mainbus0 (root): Netra T1 200 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: 4d0a000 to 4d8a000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 Sun Simba PCI-PCI rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 Sun PCIO Ebus2 (US III) rev 0x01
flashprom at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59: hostid xxxxxxxx
ebus_attach: idprom: incomplete
SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
gem0 at pci1 dev 12 function 1 Sun ERI Ether rev 0x01: ivec 3006, address [_MAC_XXXXXXXXXX]
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0010dd, model 0x0002
ohci0 at pci1 dev 12 function 3 Sun USB rev 0x01: ivec 24, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
alipm0 at pci1 dev 3 function 0 Acer Labs M7101 Power rev 0x00: 74KHz clock
iic0 at alipm0
admtemp0 at iic0 addr 0x18: max1617
at34c02 at iic0 addr 0x54 not configured
at34c02 at iic0 addr 0x55 not configured
at34c02 at iic0 addr 0x56 not configured
at24c64 at iic0 addr 0x50 not configured
at24c64 at iic0 addr 0x51 not configured
ebus1 at pci1 dev 7 function 0 Acer Labs M1533 ISA rev 0x00
power at ebus1 addr 800-82f ipl 37 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
pciide0 at pci1 dev 13 function 0 Acer Labs M5229 UDMA IDE rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 180c for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 Sun ERI Ether rev 0x01: ivec 301c, address [_MAC_XXXXXXXXXX]
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0010dd, model 0x0002
ohci1 at pci1 dev 5 function 3 Sun USB rev 0x01: ivec 26, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Sun OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ppb1 at pci0 dev 1 function 0 Sun Simba PCI-PCI rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 Symbios Logic 53c896 rev 0x07: ivec 1820, using 8K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318305LSUN18G, 0340> SCSI3 0/direct fixed
sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total
siop1 at pci2 dev 8 function 1 Symbios Logic 53c896 rev 0x07: ivec 1820, using 8K of on-board RAM
scsibus1 at siop1: 16 targets
pcons at mainbus0 not configured
No counter-timer -- using %tick at 500MHz as system clock.
root on sd0a
siop0: target 0 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102