Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2007-01-29 12:06:39
From: herdware
Description: Packard Bell P4
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.9 (GENERIC) #0: Sun Jan 28 18:19:09 CET 2007
bjorn@fafner:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 767 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 743 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel (686-class), 2992.70 MHz, id 0xf49
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 641d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu0: features3 20000000<EM64T>
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0x5a33 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: ATI Technologies RS480 PCI Express Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies product 0x5a61 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ixpide0 at pci0 dev 18 function 0
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using irq 11 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ohci0 at pci0 dev 19 function 0: ATI Technologies product 0x4387 (rev. 0x00)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 19 function 1: ATI Technologies product 0x4388 (rev. 0x00)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 19 function 2: ATI Technologies product 0x4389 (rev. 0x00)
ohci2: interrupting at irq 3
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3 at pci0 dev 19 function 3: ATI Technologies product 0x438a (rev. 0x00)
ohci3: interrupting at irq 10
ohci3: OHCI version 1.0, legacy supportusb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci4 at pci0 dev 19 function 4: ATI Technologies product 0x438b (rev. 0x00)
ohci4: interrupting at irq 3
ohci4: OHCI version 1.0, legacy support
usb4 at ohci4: USB revision 1.0
uhub4 at usb4
uhub4: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 19 function 5: ATI Technologies product 0x4386 (rev. 0x00)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
usb5 at ehci0: USB revision 2.0
uhub5 at usb5
uhub5: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
ATI Technologies product 0x4385 (SMBus serial bus, revision 0x13) at pci0 dev 20 function 0 not configured
ixpide1 at pci0 dev 20 function 1
ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at irq 14
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at irq 15
atabus3 at ixpide1 channel 1
azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
azalia0: interrupting at irq 5
azalia0: host: 0x1002/0x4383 (rev. 0)
azalia0: host: High Definition Audio rev. 1.0
pcib0 at pci0 dev 20 function 3
pcib0: ATI Technologies product 0x438d (rev. 0x00)
ppb1 at pci0 dev 20 function 4: ATI Technologies product 0x4384 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
rtk0 at pci2 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 9
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Philips SAA7133HL PCI A/V broadcast decoder (miscellaneous multimedia, revision 0xd1) at pci2 dev 2 function 0 not configured
rtk1 at pci2 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk1: interrupting at irq 7
rtk1: Ethernet address [_MAC_XXXXXXXXXX]
rlphy1 at rtk1 phy 7: Realtek internal PHY
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug n Play devices found
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
azalia0: codec[3]: 0x10ec/0x0888 (rev. 0.1)
azalia0: codec[3]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
umass0 at uhub5 port 2 configuration 1 interface 0
umass0: Cypress Semiconductor Cypress AT2LP RC7, rev 2.00/2.40, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ST325082, 3A, 0000> disk fixed
sd0: 232 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
umass1 at uhub2 port 2 configuration 1 interface 0
umass1: Alcor Micro USB Reader, rev 1.10/1.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 4 luns per target
sd1 at scsibus1 target 0 lun 0: <Generic, USB SD Reader, 1.00> disk removable
sd1: drive offline
sd2 at scsibus1 target 0 lun 1: <Generic, USB CF Reader, 1.01> disk removable
sd2: drive offline
sd3 at scsibus1 target 0 lun 2: <Generic, USB SM Reader, 1.02> disk removable
wd0 at atabus0 drive 0sd3: drive offline
: <ST3250820AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <ST3250820AS>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
sd4 at scsibus1 target 0 lun 3: <Generic, USB MS Reader, 1.03> disk removable
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <PHILIPS DVD8801, , NW02> cdrom removable
sd4: drive offline
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd2 at atabus2 drive 1: <FUJITSU MPF3204AT>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 19546 MB, 39714 cyl, 16 head, 63 sec, 512 bytes/sect x 40031712 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd2(ixpide1:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
root on wd1a dumps on wd1b