Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2007-02-17 00:19:31
From: webbie
Description: Dell OptiPlex GX110
OpenBSD 4.0-stable (GENERIC) #15: Wed Jan 17 16:55:58 EST 2007
    xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (GenuineIntel 686-class) 932 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 400158720 (390780K)
avail mem = 356823040 (348460K)
using 4256 buffers containing 20111360 bytes (19640K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/06/01, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (67 entries)
bios0: Dell Computer Corporation OptiPlex GX150
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbb40/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801BA LPC rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x800 0xca800/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82815 Hub rev 0x02
vga1 at pci0 dev 2 function 0 Intel 82815 Graphics rev 0x02: aperture at 0xf8000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 7 function 0 3Com 3c905C 100Base-TX rev 0x74: irq 9, address xx:xx:xx:xx:xx:xx
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci1 dev 9 function 0 3Com 3c905B 100Base-TX rev 0x30: irq 3, address xx:xx:xx:xx:xx:xx
exphy0 at xl1 phy 24: 3Com internal media interface
ral0 at pci1 dev 10 function 0 Ralink RT2560 rev 0x01: irq 11, address xx:xx:xx:xx:xx:xx
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
xl2 at pci1 dev 12 function 0 3Com 3c905C 100Base-TX rev 0x78: irq 3, address xx:xx:xx:xx:xx:xx
exphy1 at xl2 phy 24: 3Com internal media interface
ichpcib0 at pci0 dev 31 function 0 Intel 82801BA LPC rev 0x02
pciide0 at pci0 dev 31 function 1 Intel 82801BA IDE rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T010H1>
wd0: 16-sector PIO, LBA, 9536MB, 19531250 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Lite-On, LTN486 48x Max, YD01> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 Intel 82801BA SMBus rev 0x02: SMBus disabled
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e575 netmask ef7d ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)