Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2007-02-18 11:11:15
From: Benoi
Description: Compaq Deskpro En
OpenBSD 4.0-current (GENERIC) #1360: Tue Feb  6 17:40:22 MST 2007
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (GenuineIntel 686-class) 864 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 535261184 (522716K)
avail mem = 480169984 (468916K)
using 4256 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/25/00, BIOS32 rev. 0 @ 0xe7300, SMBIOS rev. 2.3 @ 0xf8dc6 (50 entries)
bios0: Compaq Deskpro
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xe7300/0x8d00
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6260/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801BA LPC rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x6000 0xd0000/0x6000 0xe0000/0x10000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82815 Hub rev 0x02: rng active, 7Kb/sec
vga1 at pci0 dev 2 function 0 Intel 82815 Graphics rev 0x02: aperture at 0x44000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0x01
pci1 at ppb0 bus 2
ahc0 at pci1 dev 4 function 0 Adaptec AHA-2940U rev 0x01: irq 5
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd0: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
sd1 at scsibus0 targ 2 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd1: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
sd2 at scsibus0 targ 4 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd2: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
fxp0 at pci1 dev 8 function 0 Intel 82562 rev 0x01, i82562: irq 10, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
ahc1 at pci1 dev 10 function 0 Adaptec AHA-2940U rev 0x01: irq 11
scsibus1 at ahc1: 16 targets
sd3 at scsibus1 targ 0 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd3: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
sd4 at scsibus1 targ 2 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd4: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
sd5 at scsibus1 targ 4 lun 0: <IBM-PCCO, DDRS-34560W !#, S97B> SCSI2 0/direct fixed
sd5: 4303MB, 8387 cyl, 5 head, 210 sec, 512 bytes/sec, 8813870 sec total
ichpcib0 at pci0 dev 31 function 0 Intel 82801BA LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801BA IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd0 matches BIOS drive 0x80
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd1 matches BIOS drive 0x81
ahc0: target 4 using 16bit transfers
ahc0: target 4 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd2 matches BIOS drive 0x82
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd3 matches BIOS drive 0x83
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd4 matches BIOS drive 0x84
ahc1: target 4 using 16bit transfers
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd5 matches BIOS drive 0x85
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02