Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2007-02-23 14:36:25
From: tpk
Description: just a noname PC
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Fri Feb  2 22:25:59 CET 2007
    xxx@xxx.xxx:/usr/src/sys/i386/compile/DURON
ACPI APIC Table: <AMIINT SiS735XX>
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: AMD Duron(tm) Processor (857.64-MHz 686-class CPU)
  Origin = AuthenticAMD  Id = 0x631  Stepping = 1
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow+,3DNow>
real memory  = 805240832 (767 MB)
avail memory = 778629120 (742 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd1ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 19 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 23 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xcfffd000-0xcfffdfff irq 22 at device 3.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: xx:xx:xx:xx:xx:xx
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 17 at device 11.0 on pci0
uhci0: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci0
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 18 at device 11.1 on pci0
uhci1: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci1
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xcfffcf00-0xcfffcfff irq 19 at device 11.2 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
dc0: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xcfffc800-0xcfffcbff irq 18 at device 13.0 on pci0
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xcfffce00-0xcfffceff irq 19 at device 15.0 on pci0
miibus2: <MII bus> on rl0
rlphy1: <RealTek internal media interface> on miibus2
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter TSC frequency 857640856 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 12419MB <Seagate ST313032A 3.09> at ata0-master UDMA33
cd0 at ata1 bus 0 target 1 lun 0
cd0: <LG CD-RW CED-8083B 1.05> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: cd present [293571 x 2048 byte records]
Trying to mount root from ufs:/dev/ad0s1a
drm0: <ATI Rage 128 RF (AGP)> port 0x9800-0x98ff mem 0xc8000000-0xcbffffff,0xcfefc000-0xcfefffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 32MB
info: [drm] Initialized r128 2.5.0 20030725