Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2007-03-13 05:44:54
From: Lasse
Description: Sun Ultra 10
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.5-RELEASE #0: Tue Jun 27 01:01:32 EEST 2006
Timecounter tick frequency 333000000 Hz quality 1000
real memory  = 536870912 (512 MB)
avail memory = 514662400 (490 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (333.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
auxio0: <Sun Auxiliary I/O> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid xxxxxxxx
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
pci2: <bridge> at device 4.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0x2800000-0x2807fff at device 4.1 on pci2
miibus1: <MII bus> on hme1
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: xx:xx:xx:xx:xx:xx
Timecounters tick every 10.000 msec
ad0: 9787MB <QUANTUM FIREBALL EL10.2A/A08.1100> [19885/16/63] at ata3-master WDMA2
Mounting root from ufs:/dev/ad0a
IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled