Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2007-07-05 13:57:46
From: uv-negativa
Description: HP Pavilion tx 1000
OpenBSD 4.1-current (GENERIC) #1128: Thu Jun 28 00:53:16 MDT 2007
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1005178880 (958MB)
avail mem = 964595712 (919MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf1870 (20 entries)
bios0: Hewlett-Packard HP Pavilion tx1000 Notebook PC
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1607.54 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
NVIDIA C51 Host rev 0xa2 at pci0 dev 0 function 0 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 1 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 2 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 3 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 4 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 5 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 6 not configured
NVIDIA C51 Memory rev 0xa2 at pci0 dev 0 function 7 not configured
ppb0 at pci0 dev 2 function 0 NVIDIA C51 PCIE rev 0xa1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 NVIDIA C51 PCIE rev 0xa1
pci2 at ppb1 bus 3
Broadcom BCM4312 rev 0x01 at pci2 dev 0 function 0 not configured
vga1 at pci0 dev 5 function 0 vendor NVIDIA, unknown product 0x0244 rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
NVIDIA MCP51 Host rev 0xa2 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 NVIDIA MCP51 ISA rev 0xa3
nviic0 at pci0 dev 10 function 1 NVIDIA MCP51 SMBus rev 0xa3
iic0 at nviic0
iic1 at nviic0
NVIDIA MCP51 PMU rev 0xa3 at pci0 dev 10 function 3 not configured
ohci0 at pci0 dev 11 function 0 NVIDIA MCP51 USB rev 0xa3: irq 11, version 1.0, legacy support
ehci0 at pci0 dev 11 function 1 NVIDIA MCP51 USB rev 0xa3: irq 7
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 13 function 0 NVIDIA MCP51 IDE rev 0xf1: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4084N, KQ09> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 NVIDIA MCP51 SATA rev 0xf1: DMA
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FUJITSU MHV2120BH PL>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb2 at pci0 dev 16 function 0 NVIDIA MCP51 PCI-PCI rev 0xa2
pci3 at ppb2 bus 7
azalia0 at pci0 dev 16 function 1 NVIDIA MCP51 HD Audio rev 0xa2: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x10ec/0x0862 (rev. 0.1), HDA version 1.0
azalia0: codec: 0x1057/0x3055 (rev. 7.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
nfe0 at pci0 dev 20 function 0 NVIDIA MCP51 LAN rev 0xa3: irq 11, address [_MAC_XXXXXXXXXX]
rgephy0 at nfe0 phy 1: RTL8169S/8110S PHY, rev. 2
pchb0 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00
pchb1 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00
pchb2 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00
pchb3 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub2 at uhub0 port 2: Cypress Semiconductor USB2 Hub, rev 2.00/90.15, addr 2
ugen0 at uhub2 port 1
ugen0: Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/2.10, addr 3
ugen1 at uhub2 port 2
ugen1: AuthenTec Fingerprint Sensor, rev 1.10/c.10, addr 4
uts0 at uhub2 port 3 configuration 1 interface 0
uts0: eGalax INC. USB TouchController, rev 1.10/1.00, addr 5
wsmouse1 at uts0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
uhub3 at uhub0 port 1: Genesys Logic USB2.0 Hub, rev 2.00/7.02, addr 6
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: vendor 0x04d9 product 0x1203, rev 2.00/2.60, addr 7, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: vendor 0x04d9 product 0x1203, rev 2.00/2.60, addr 7, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub3 port 3 configuration 1 interface 0
uhidev2: Genius 4D Scroll Mouse, rev 1.10/0.00, addr 8, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir.
wsmouse2 at ums0 mux 0
rum0 at uhub0 port 8
rum0: Airlink101 Airlink101 USB XR Adapter, rev 2.00/0.01, addr 9
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address [_MAC_XXXXXXXXXX]