NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2007-07-09 15:36:08
From: Angel Ortiz
Description: Soekris Net4801-50

t_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
OpenBSD 4.1 (GENERIC) #0: Sun Jun 10 05:04:14 EDT 2007
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (130652K)
avail mem = 114675712 (111988K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 20/70/26, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
OpenBSD 4.1 (GENERIC) #0: Sun Jun 10 05:04:14 EDT 2007
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (130652K)
avail mem = 114675712 (111988K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 20/70/26, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
OpenBSD 4.1 (GENERIC) #0: Sun Jun 10 05:04:14 EDT 2007
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (130652K)
avail mem = 114675712 (111988K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 20/70/26, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
OpenBSD 4.1 (GENERIC) #0: Sun Jun 10 05:04:14 EDT 2007
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (130652K)
avail mem = 114675712 (111988K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 20/70/26, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
OpenBSD 4.1 (GENERIC) #0: Sun Jun 10 05:04:14 EDT 2007
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (130652K)
avail mem = 114675712 (111988K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 20/70/26, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
sis0 at pci0 dev 6 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10, address [_MAC_XXXXXXXXXX]
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA, 15805MB, 32369266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 Compaq USB OpenHost rev 0x08: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.