Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2007-09-18 20:49:47
From: bseklecki
Description: Axiomtek NA-1041 Via C3
OpenBSD 4.1-stable (RD-MP-CFLAB00-41) #17: Thu Jun 7 21:06:05 EDT 2007
root@vmware-sandbox-openbsd-lab:/usr/src/sys/arch/i386/compile/RD-MP-CFLAB00-41
cpu0: VIA Samuel 2 (CentaurHauls 686-class) 801 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem = 400060416 (390684K)
avail mem = 340836352 (332848K)
using 4278 buffers containing 20127744 bytes (19656K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/23/04, BIOS32 rev. 0 @ 0xfb570
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 (VIA VT82C596A ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 VIA VT8601 PCI rev 0x05
ppb0 at pci0 dev 1 function 0 VIA VT82C601 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 Trident CyberBlade i1 rev 0x6a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 VIA VT82C686 ISA rev 0x40
pciide0 at pci0 dev 7 function 1 VIA VT82C571 IDE rev 0x06: ATA100, channel 0 configured to compatibility, channel
1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-2048>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 VIA VT83C572 USB rev 0x1a: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 VIA VT83C572 USB rev 0x1a: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 VIA VT82C686 SMBus rev 0x40
re0 at pci0 dev 16 function 0 Realtek 8139 rev 0x20: RTL8139C+ (0x7480), irq 5, address [_MAC_XXXXXXXXXX]
rlphy0 at re0 phy 0: RTL internal PHY
re1 at pci0 dev 17 function 0 Realtek 8139 rev 0x20: RTL8139C+ (0x7480), irq 12, address [_MAC_XXXXXXXXXX]
rlphy1 at re1 phy 0: RTL internal PHY
re2 at pci0 dev 18 function 0 Realtek 8139 rev 0x20: RTL8139C+ (0x7480), irq 10, address [_MAC_XXXXXXXXXX]
rlphy2 at re2 phy 0: RTL internal PHY
re3 at pci0 dev 19 function 0 Realtek 8139 rev 0x20: RTL8139C+ (0x7480), irq 11, address [_MAC_XXXXXXXXXX]
rlphy3 at re3 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e745 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
rd0: fixed, 32768 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a