Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2007-12-28 11:46:36
From: matthew sporleder
Description: soekris 4801
NetBSD 3.1 (GENERIC)`#0: Tue Oct 31 04:27:07 UTC 2006
        [_EMAIL_XXXXXXXXXXX]:/home/builds/ab/netbsd-3-1-RELEASE/i386/200610302053Z-obj/home/bui
lds/ab/netbsd-3-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
avail memory = 116 MB
BIOS32 rev. 0 found at00xf7840
mainbus0 (root)Kcpu0 at mainbus0: (uniprocessor)
cpu0: National Semiconductor Geode GX1 (586-class), 266.65 MHz, id 0x540
cpu0: features 808131<FPU,TSC,MSR,CX8>
cpu0: features 808131<CMOV,MMX>
cpu0: Geode(TM) Integrated Processor by National Semib
cpu0: I-cache 12K uOp cache 8-way
WARNING: broken TSC disabled
pci0 at mainbus0 M-bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Cyrix MediaGX Built-in PCI Host Controller (rev. 0x00)
sip0 at pci0 dev 6 function 0: NatSemi DP83895 10/100 Ethernet, rev 00
sip0: interrupting at irq 10
sip0: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10caseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sip1 at pci0 dev 7 function 0: NatSemi DP8381M-5 10/100 Ethernet, rev 00
sip1: interrupting at irq 10
sip1: Ethernet address 00:00:24:cM-5:3d:11
nsphyter1 at sip1 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sip2 at pci0 dev 8 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip2: interrupting at irq 10
sip2: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter2 at sip2 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0$at pci1 dev 18 function 0
pcib0: National Semiconductor SC110M-0 PCI-ISA bridge (rev. 0x00)
National Semiconductor SC1100 SMI/ACPI (miscellaneous bridgM-e) at!pci0 dev 18 function 1 not c
onfigured
geodeide0 at pci0 dev 18 function 2
geodeide0: AMD Geode SC1100 IDE controller (rev. 0x01)
geodeide0: bus-master DMA support present
geodeide0: primary channel wired to compatibility mode
geodeide0: primary channel interrupting at irq 14
atabus0 at geodeide0 channel 0
geodeide0: secondary channel wired to compatibility mode
geodeide0: secondary channel interrupting at irq 15
atabus1 at geodeide0 channel 1
geodewdog0 at pci0 dev 18 function 5: AMD Geode M-SC1100 Watchdog Timer
ohci0 at pci0 dev 19 function$0: Compaq USB Controller (rev. 0x08)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at rcib0
com0 at isa0 port 0x3f8-0x3ff irq 4:$ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa4 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug n Play devices found
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <SanDisk SDCFB-512>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1001944 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(geodeide0:0:0): using PIO mode 4,$DMA mode 2 (using dMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr$2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at(scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 1968 MB, 7872 cyl, 16 head, 32 sec, 512 bytes/sect x 4030464 sectors
sd0(umass0:0:0:0): no door(lock