Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2008-05-09 00:25:57
From: Fred Noz
Description: Sun Netra X1 500 MHz
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.

OpenBSD 4.2 (GENERIC) #1427: Tue Aug 28 10:46:40 MDT 2007
real mem = 939524096 (896MB)
avail mem = 897081344 (855MB)
mainbus0 at root: Sun Netra X1 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz, version 0 FPU
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map 60000000-7fffffff, iotdb 10e4000-1164000
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 Acer Labs M1533 ISA rev 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: m5819
power0 at ebus0 addr 2000-2007 ipl 35
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
flashprom at ebus0 addr 0-7ffff not configured
Acer Labs M7101 Power rev 0x00 at pci0 dev 3 function 0 not configured
dc0 at pci0 dev 12 function 0 Davicom DM9102 rev 0x31: ivec 0x7c6, address [_MAC_XXXXXXXXXX]
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 Davicom DM9102 rev 0x31: ivec 0x7dc, address [_MAC_XXXXXXXXXX]
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 Acer Labs M5237 USB rev 0x03: ivec 0x7e4, version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 Acer Labs M5229 UDMA IDE rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
pcons at mainbus0 not configured
bootpath: /pci@1f,0/ide@d,0/disk@0,0
root on wd0a swap on wd0b dump on wd0b
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc1: failed to force tx and rx to idle state
dc1: failed to force tx and rx to idle state