Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2008-06-06 13:07:36
From: Stefan Kaishakunin Schumacher
Description: IBM Thinkpad X24
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.36 (THINKPAD) #5: Wed Dec 26 02:51:07 CET 2007
	[_EMAIL_XXXXXXXXXXXXXXX]:/usr/home/unenc/src/head/source/sets/usr/src/sys/arch/i386/compile/obj/THINKPAD
total memory = 383 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 365 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7e0
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x248a new address 0x18000000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1132.44 MHz, id 0x6b1
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: Intel(R) Pentium(R) III Mobile CPU      1133MHz
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: cant find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82830MP CPU to AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at irq 4
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
uhci2: interrupting at irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 3 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x80)
cbb1 at pci2 dev 3 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0x80)
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 3
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 10
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug n Play devices found
apm0 at mainbus0: Advanced Power Management BIOS: Power Management spec V1.2
apm0: battery life expectancy: 86%
apm0: A/C state: on
apm0: battery charge state: high charging
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
auich0: measured ac97 link rate at 38699 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
uhub3 at uhub1 port 1
uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub3: 7 ports with 7 removable, self powered
ugen0 at uhub0 port 1
ugen0: AFA Cinergy T USB XE, rev 1.10/1.00, addr 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <TOSHIBA MK8032GAX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-6750A, , 2.01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Rockfire product 0xa00b, rev 1.10/1.00, addr 3, iclass 3/0
uhid0 at uhidev0: input=8, output=3, feature=3
uhub4 at uhub3 port 4
uhub4: Cherry USB-Hub, class 9/0, rev 1.10/2.15, addr 4
uhub4: 5 ports with 4 removable, bus powered
Kernelized RAIDframe activated
uhidev1 at uhub4 port 4 configuration 1 interface 0
uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 5, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhidev2 at uhub4 port 5 configuration 1 interface 0
uhidev2: Cherry USB-Keyboard, rev 1.10/2.15, addr 6, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x50, vt100 emulation)
wsdisplay0: screen 7 added (80x50, vt100 emulation)