Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2008-11-16 00:05:37
From: Eric
Description: Generic Beigebox
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0.1 (PURGATORY) #0: Tue Oct 21 05:41:45 EDT 2008
eric@yellow:/usr/src/sys/arch/i386/compile/PURGATORY
total memory = 97904 KB
avail memory = 93404 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf06f0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6-2 (586-class), 300.69 MHz, id 0x580
cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8001bf<MMX>
cpu0: AMD-K6(tm) 3D processor
cpu0: I-cache 32 KB 32B/line 2-way, D-cache 32 KB 32B/line 2-way
cpu0: ITLB 64 4 KB entries direct-mapped
cpu0: DTLB 128 4 KB entries 2-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x10b9 product 0x1541 (rev. 0x04)
agp0 at pchb0: aperture at 0xe6000000, size 0x1000000
ppb0 at pci0 dev 1 function 0: vendor 0x10b9 product 0x5243 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x474d (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
vendor 0x10b9 product 0x7101 (miscellaneous bridge) at pci0 dev 3 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x10b9 product 0x1533 (rev. 0xc3)
ex0 at pci0 dev 9 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 11
ex0: MAC address [_MAC_XXXXXXXXXX]
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci0 dev 10 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex1: interrupting at irq 10
ex1: MAC address [_MAC_XXXXXXXXXX]
exphy1 at ex1 phy 24: 3Com internal media interface
exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex2 at pci0 dev 11 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex2: interrupting at irq 9
ex2: MAC address [_MAC_XXXXXXXXXX]
exphy2 at ex2 phy 24: 3Com internal media interface
exphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0 at pci0 dev 15 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
isa0 at pcib0
ep0 at isa0 port 0x300-0x30f irq 7: 3Com 3C509 Ethernet
ep0: address [_MAC_XXXXXXXXXX], 8KB byte-wide FIFO, 1:1 Rx:Tx split
ep0: 10baseT, 10base5 (default 10baseT)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
timecounter: Timecounter TSC frequency 300692210 Hz quality 800
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.2MB, 80 cyl, 2 head, 15 sec
wd0 at atabus0 drive 0: <Seagate Technology 1275MB - ST31276A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1221 MB, 2482 cyl, 16 head, 63 sec, 512 bytes/sect x 2502308 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(aceride0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BCD-40XH CD-ROM, MT1102 Firmware, VER 2.3> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs