Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2008-11-23 14:29:23
From: magnus
Description: iBook G4
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.72 (IBOOK) #0: Sat Aug 23 00:43:57 CEST 2008 magnus@zemdatav:/media/e/netbsd/obj/sys/arch/macppc/compile/IBOOK total memory = 512 MB avail memory = 489 MB timecounter: Timecounters tick every 10.000 msec found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f4000000/ata-6@d/disk@0:5,/netbsd mainbus0 (root) cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary) cpu0: HID0 8450c0bc<EMCP,EICE,NAP,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT>, powersave: 1 cpu0: 534.98 MHz, 512KB L2 cache no parity parity enabled uni_n0 at mainbus0 address 0xf8000000 hw-clock at uni_n0 not configured ki2c0 at uni_n0 address 0xf8001000 iic0 at ki2c0: I2C bus adt7467c0 at ki2c0 ADT7467 thermal monitor and fan controller, rev. 7.1 cereal at ki2c0 address 0x1c0 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00) radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon Mobility 9200 (M9+) radeonfb0: Video BIOS not present radeonfb0: No video BIOS, using default clocks radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 350000 radeonfb0: using static EDID max_dotclock according to supported modes: 65000 radeonfb0: using static EDID max_dotclock according to supported modes: 65000 radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000 radeonfb0: display 0: initial virtual resolution 1024x768 at 32 bpp radeonfb0: port 0: physical 1024x768 60Hz radeonfb0: port 1: physical 1024x768 60Hz init engine wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at radeonfb0 not configured uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) obio0 at pci1 dev 23 function 0: addr 0x80000000 zsc0 at obio0: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 12 pmu0: initializing IIC bus pmu0: initializing RTC pmu0: initializing ADB nadb0 at pmu0: Apple Desktop Bus pmu0: power-mgt not configured smartbat0 at pmu0 addr 0: smart battery flags: 5 AC present ki2c1 at obio0 iic1 at ki2c1: I2C bus cereal at ki2c1 address 0x1c0 not configured deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer atabus0 at wdc0 channel 0 snapper0: codec: TAS3004 audio0 at snapper0: full duplex ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci0: cant map mem space ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci1: cant map mem space ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci2: interrupting at irq 29 ohci2: OHCI version 1.0, legacy support usb0 at ohci2: USB revision 1.0 ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43) ohci3: interrupting at irq 63 ohci3: OHCI version 1.0 usb1 at ohci3: USB revision 1.0 ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43) ohci4: interrupting at irq 63 ohci4: OHCI version 1.0 usb2 at ohci4: USB revision 1.0 ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04) ehci0: interrupting at irq 63 ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci3 ohci4 usb3 at ehci0: USB revision 2.0 uninorth2 at mainbus0 pci2 at uninorth2 bus 0 pci2: i/o space, memory space enabled pchb2 at pci2 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) wdc1 at pci2 dev 13 function 0: interrupting at irq 39 atabus1 at wdc1 channel 0 fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81) fwohci0: interrupting at irq 40 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:fc:d0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80) gem0: interrupting at irq 41 bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: Ethernet address [_MAC_XXXXXXXXXX], 10KB RX fifo, 4KB TX fifo biomask 8001ffe netmask 8001ffe ttymask 8001ffe timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0 timecounter: Timecounter mftb frequency 18432000 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode ieee1394if0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) ieee1394if0: bus manager 1 (me) uhub0 at usb0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 5 ports with 5 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: <MATSHITACD-RW CW-8123, , CA0T> cdrom removable ieee1394if0: New S400 device ID:00d04b5a09066203 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) sbp0 at ieee1394if0: SBP-2/SCSI over IEEE1394 scsibus0 at sbp0: 1 target, 0 luns per target adbkbd0 at nadb0 addr 2: iBook keyboard wskbd0 at adbkbd0: console keyboard, using wsdisplay0 wsmouse0 at adbkbd0 mux 0 adbms0 at nadb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse1 at adbms0 mux 0 adbbt0 at nadb0 addr 7: button device AC Power: AC adapter online. sd0 at scsibus0 target 0 lun 0: <LaCie Gr, LaCie Rugged LUN, 0102> simplified direct fixed sd0: 111 GB, 114473 cyl, 64 head, 32 sec, 512 bytes/sect x 234441648 sectors ral0 at uhub3 port 1 ral0: ASUS 802.11g WLAN Drive, rev 2.00/0.01, addr 2 ral0: MAC/BBP RT2570 (rev 0x03), RF RT2526 ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wd0 at atabus1 drive 0: <Hitachi IC25N040ATMR04-0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs