Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2008-12-29 09:42:14
From: Dan
Description: IBM Thinkpad x40
OpenBSD 4.4-current (GENERIC) #1636: Mon Dec 22 11:50:42 MST 2008
    xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.50GHz (GenuineIntel 686-class) 599 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem  = 795242496 (758MB)
avail mem = 760107008 (724MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/21/06, BIOS32 rev. 0 @ 0xfd740, SMBIOS rev. 2.33 @ 0xe0010 (56 entries)
bios0: vendor IBM version 1UETD3WW (2.08 ) date 12/21/2006
bios0: IBM 2371J4U
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 27%
apm0: AC off, battery charge high, estimated 0:50 hours
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000 0xcd800/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 600 MHz (988 mV): speeds: 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel 82855GM Host rev 0x02
Intel 82855GM Memory rev 0x02 at pci0 dev 0 function 1 not configured
Intel 82855GM Config rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 Intel 82855GM Video rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1: irq 11
drm0 at inteldrm0
Intel 82855GM Video rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 Intel 82801DB USB rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x81
pci1 at ppb0 bus 2
cbb0 at pci1 dev 0 function 0 Ricoh 5C476 CardBus rev 0x8d: irq 11
sdhc0 at pci1 dev 0 function 1 Ricoh 5C822 SD/MMC rev 0x13: irq 11
sdmmc0 at sdhc0
em0 at pci1 dev 1 function 0 Intel PRO/1000MT Mobile (82541GI) rev 0x00: irq 11, address xx:xx:xx:xx:xx:xx
ral0 at pci1 dev 2 function 0 Ralink RT2860 rev 0x00: irq 11, address xx:xx:xx:xx:xx:xx
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T3R)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 Intel 82801DBM LPC rev 0x01: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 Intel 82801DBM IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK13FA-40B>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 Intel 82801DB SMBus rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 Intel 82801DB AC97 rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
Intel 82801DB Modem rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b