Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2009-04-20 23:29:23
From: dingo
Description: ibook g3 dual-usb
[ using 426072 bytes of bsd ELF symbol table ]
console out [ATY,RageM3p29s]console in [keyboard] , using ADB
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.5 (GENERIC) #2030: Sat Feb 28 14:00:41 MST 2009
    xxx@xxx.xxx:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 335544320 (320MB)
avail mem = 311394304 (296MB)
mainbus0 at root: model PowerBook4,1
cpu0 at mainbus0: 750 (Revision 0x3311): 499 MHz: 256KB backside cache
mem0 at mainbus0
spdmem0 at mem0: SDRAM non-parity PC66
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL3
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 Apple Pangea AGP rev 0x00
vgafb0 at pci0 dev 16 function 0 ATI Mobility M3 rev 0x02, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 Apple Pangea rev 0x00
macobio0 at pci1 dev 23 function 0 Apple Pangea Macio rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
programmer-switch at macgpio0 not configured
firewire-linkon at macgpio0 not configured
gpio1 at macgpio0 not configured
gpio9 at macgpio0 not configured
extint-gpio4 at macgpio0 not configured
extint-gpio12 at macgpio0 not configured
escc-legacy at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
tumbler0 at macobio0 offset 0x10000: irq 30,1,2
timer at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 100% charged
battery at macobio0 offset 0x0 not configured
backlight at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <IBM-DJSA-210>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-177, 7A0A> ATAPI 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address xx:xx:xx:xx:xx:xx
audio0 at tumbler0
ohci0 at pci1 dev 24 function 0 Apple Pangea USB rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 Apple Pangea USB rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 Apple OHCI root hub rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 Apple OHCI root hub rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 Apple Pangea PCI rev 0x00
Apple Pangea FireWire rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 Apple Pangea GMAC rev 0x00: irq 41, address xx:xx:xx:xx:xx:xx
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 3
ural0 at uhub1 port 1 Ralink 802.11g WLAN rev 2.00/0.01 addr 2
ural0: MAC/BBP RT2570 (rev 0x05), RF RT2526, address xx:xx:xx:xx:xx:xx
softraid0 at root
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b