Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2009-08-28 17:04:43
From: Brian Seklecki
Description: RHEL 5.4/x86_64 beta KVM
>> NetBSD/x86 BIOS Boot, Revision 5.2 (from NetBSD 5.0_STABLE)
>> Memory: 639/785408 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in 0 
5198800+10845892+531536 [300544+292285]=0x1061b40
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (CFRDMDROOT.MPACPI-$Revision:[_IP_XXX] $) #1: Thu Aug 27 19:21:30 EDT 2009
        [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/home/netbsd/obj.i386/2009/sys/arch/i386/compile/CFRDMDROOT-ARINFOTEK-TEAK3011-CGDNAS-NBSD41STABLE
total memory = 767 MB
avail memory = 737 MB
Generic PC
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x623
ioapic0 at mainbus0 apid 1
acpi0 at mainbus0: Intel ACPICA 20080321
pckbc0 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc1 at acpi0 (MOU, PNP0F13) (aux port): irq 12
fdc0 at acpi0 (FDC0, PNP0700): io 0x3f2-0x3f5,0x3f7 irq 6 drq 2
com1 at acpi0 (COM1, PNP0501-1): io 0x3f8-0x3ff irq 4
com1: ns16550a, working fifo
com1: console
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x00)
piixide0 at pci0 dev 1 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: Intel 82371SB (PIIX3) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3
piixpm0: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x03)
piixpm0: 24-bit timer
piixpm0: interrupting at irq 9
iic0 at piixpm0: I2C bus
vga0 at pci0 dev 2 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
re0 at pci0 dev 3 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re0: interrupting at irq 11
re0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wm0 at pci0 dev 4 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: unable to read Ethernet address
ne0 at pci0 dev 5 function 0: Realtek 8029 Ethernet
ne0: Ethernet address [_MAC_XXXXXXXXXX]
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x40 0x40] 10baseT-FDX
ne0: interrupting at irq 10
Ensoniq AudioPCI (audio multimedia) at pci0 dev 6 function 0 not configured
isa0 at pcib0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff
attimer0: attached to pcppi0
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
wd0 at atabus0 drive 0: <QEMU HARDDISK>
wd0: 1943 MB, 3949 cyl, 16 head, 63 sec, 512 bytes/sect x 3980592 sectors
wd1 at atabus0 drive 1: <QEMU HARDDISK>
wd1: 9000 MB, 18285 cyl, 16 head, 63 sec, 512 bytes/sect x 18432000 sectors
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
IPsec: Initialized Security Association Processing.
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.9.1> cdrom removable
boot device: wd0
root on md0a dumps on md0b
root file system type: ffs