Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2010-03-03 19:21:52
From: Siraaj Khandkar
Description: V2DP + AMD Geode NX 1500 (modified Barracuda Spyware Firewall)
OpenBSD 4.6-stable (GENERIC) #0: Sun Feb 14 16:18:35 EST 2010
xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Athl (AuthenticAMD 686-class, 256KB L2 cache) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 251162624 (239MB)
avail mem = 234016768 (223MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/22/05, BIOS32 rev. 0 @ 0xfb700, SMBIOS rev. 2.3 @ 0xf0000 (38 entries)
bios0: vendor Phoenix Technologies, LTD version 6.00 PG date 06/22/2005
bios0: VIA Technologies, Inc. KM266PRO-8235
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf74
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 (VIA VT82C596A ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 VIA VT8378 PCI rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xee000000, size 0xe100000
ppb0 at pci0 dev 1 function 0 VIA VT8377 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 VIA VT8378 VGA rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 8 function 0 Realtek 8139 rev 0x10: irq 12, address xx:xx:xx:xx:xx:xx
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 9 function 0 Realtek 8139 rev 0x10: irq 10, address xx:xx:xx:xx:xx:xx
rlphy1 at rl1 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 VIA VT8235 ISA rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 17 function 1 VIA VT82C571 IDE rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3402111A>
wd0: 16-sector PIO, LBA48, 38166MB, 78163968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
vr0 at pci0 dev 18 function 0 VIA RhineII-2 rev 0x74: irq 11, address xx:xx:xx:xx:xx:xx
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063, model 0x0032
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e3fd netmask fffd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b