Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2010-04-13 15:15:38
From: Steven Kreuzer
Description: Sun Fire V210
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Tue Mar 30 01:29:40 UTC 2010
    [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/V210 sparc64
real memory  = 6442450944 (6144 MB)
avail memory = 6282256384 (5991 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1002.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1002.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
ispfw: registered firmware <isp_1000>
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type memory-controller (no driver attached)
pcib0: <Sun Host-PCI bridge> mem 0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff irq 2035,2032,2033,2036,2019 on nexus0
pcib0: Tomatillo, version 4, IGN 0x1f, bus B, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [FILTER]
pci0: <OFW PCI bus> on pcib0
bge0: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci0
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge0: [ITHREAD]
bge1: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci0
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: [ITHREAD]
pcib1: <Sun Host-PCI bridge> mem 0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff irq 1970,1968,1969,1972,1953 on nexus0
pcib1: Tomatillo, version 4, IGN 0x1e, bus A, 33MHz
pcib1: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib1: [FILTER]
pci1: <OFW PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
pci1: <old, non-VGA display device> at device 6.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci1
ohci0: [ITHREAD]
usbus0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
atapci0: <AcerLabs M5229 UDMA100 controller> port 0x900-0x907,0x918-0x91b,0x910-0x917,0x908-0x90b,0x920-0x92f at device 13.0 on pci1
atapci0: [ITHREAD]
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib2: <Sun Host-PCI bridge> mem 0x4000e600000-0x4000e60afff,0x4000e410000-0x4000e41701f,0x7ce00000000-0x7ce000000ff,0x4000e780000-0x4000e78ffff irq 1842,1840,1841,1844,1827 on nexus0
pcib2: Tomatillo, version 4, IGN 0x1c, bus A, 66MHz
pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib2: [FILTER]
pcib2: [FILTER]
pcib2: [FILTER]
pcib2: [FILTER]
pci2: <OFW PCI bus> on pcib2
sym0: <1010-66> port 0x900-0x9ff mem 0x100000-0x1003ff,0x102000-0x103fff at device 2.0 on pci2
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: [ITHREAD]
sym1: <1010-66> port 0xa00-0xaff mem 0x104000-0x1043ff,0x106000-0x107fff at device 2.1 on pci2
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: [ITHREAD]
pcib3: <Sun Host-PCI bridge> mem 0x4000ef00000-0x4000ef0afff,0x4000ec10000-0x4000ec1701f,0x7c600000000-0x7c6000000ff,0x4000ef80000-0x4000ef8ffff irq 1907,1904,1905,1908,1893 on nexus0
pcib3: Tomatillo, version 4, IGN 0x1d, bus B, 66MHz
pcib3: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib3: [FILTER]
pci3: <OFW PCI bus> on pcib3
bge2: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci3
miibus2: <MII bus> on bge2
brgphy2: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: [ITHREAD]
bge3: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci3
miibus3: <MII bus> on bge3
brgphy3: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: [ITHREAD]
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 44 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 44 on isa0
uart1: [FILTER]
Timecounter tick frequency 1002000000 Hz quality 10
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
acd0: DVDROM <DV-28E-B/1.2B> at ata2-master UDMA33 
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #1 Launched!
da0 at sym0 bus 0 scbus0 target 0 lun 0
da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz DT, offset 62, 16bit)
da0: Command Queueing enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 scbus0 target 1 lun 0
da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz DT, offset 62, 16bit)
da1: Command Queueing enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
GEOM: da0: adding VTOC8 information.
GEOM: da1: adding VTOC8 information.
Trying to mount root from ufs:/dev/da0a