Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2010-04-30 08:45:10
From: tlhscd
Description: Dell R210
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz (2394.00-MHz K8-class CPU)
  Origin = GenuineIntel  Id = 0x106e5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 8
  Logical CPUs per core: 2
usable memory = 4272091136 (4074 MB)
avail memory  = 4091674624 (3902 MB)
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter HPET frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral> at device 8.1 (no driver attached)
pci0: <base peripheral> at device 8.2 (no driver attached)
pci0: <base peripheral> at device 8.3 (no driver attached)
pci0: <base peripheral> at device 16.0 (no driver attached)
pci0: <base peripheral> at device 16.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf0fa000-0xdf0fa3ff irq 22 at device 26.0 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb0: waiting for BIOS to give up control
usb0: EHCI version 1.0
usb0: <EHCI (generic) USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhub1: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on uhub0
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bce0: <Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bce0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: xx:xx:xx:xx:xx:xx
bce0: [ITHREAD]
bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (0x05000B05); Flags( MFW MSI )
bce1: <Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci2
miibus1: <MII bus> on bce1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: xx:xx:xx:xx:xx:xx
bce1: [ITHREAD]
bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (0x05000B05); Flags( MFW MSI )
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf0fc000-0xdf0fc3ff irq 22 at device 29.0 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci1
usb1: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub2: 2 ports with 2 removable, self powered
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on uhub2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
ukbd0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.90, addr 3> on uhub3
kbd2 at ukbd0
uhid0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.90, addr 3> on uhub3
uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 4> on uhub3
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0xfcd0-0xfcd7,0xfcc8-0xfccb,0xfcd8-0xfcdf,0xfccc-0xfccf,0xfce0-0xfcff mem 0xdf0fe000-0xdf0fe7ff irq 20 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.30 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 152587MB <SAMSUNG HE161HJ 1AC01121> at ata2-master SATA300
GEOM_LABEL: Label for provider ad4p3 is ufsid/4bdad39a03c948f4.
acd0: DVDROM <TEAC DVD-ROM DV-28SW/R.2A> at ata5-master SATA150
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/ad4p3
GEOM_LABEL: Label ufsid/4bdad39a03c948f4 removed.
GEOM_LABEL: Label for provider ad4p3 is ufsid/4bdad39a03c948f4.
GEOM_LABEL: Label ufsid/4bdad39a03c948f4 removed.
bce0: /usr/src/sys/dev/bce/if_bce.c(1525): PHY write timeout!
bce0: /usr/src/sys/dev/bce/if_bce.c(1525): PHY write timeout!
ukbd0: at uhub3 port 2 (addr 3) disconnected
ukbd0: detached
uhid0: at uhub3 port 2 (addr 3) disconnected
uhid0: detached