Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2010-06-02 16:07:31
From: Martijn
Description: Sun Fire 280R
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.7 (RAMDISK) #223: Thu Mar 18 00:20:18 MDT 2010
    [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1030438912 (982MB)
mainbus0 at root: Sun Fire 280R (UltraSPARC-III+) 
cpu0 at mainbus0: SUNW,UltraSPARC-III+ (rev 2.3) @ 900 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: Schizo, version 5, ign 200, bus B 0 to 2
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 Sun RIO EBus rev 0x01
flashprom at ebus0 addr 0-1fffff not configured
bbc at ebus0 addr 0-fffff not configured
power at ebus0 addr 30002e-30002f, 300600-300607 not configured
i2c at ebus0 addr 2e-2f, 2d-2d ivec 0x23 not configured
i2c at ebus0 addr 30-31 ivec 0x23 not configured
beep at ebus0 addr 32-37 not configured
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
gpio at ebus0 addr 300600-300607 not configured
pmc at ebus0 addr 300700-300701 not configured
parallel at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c not configured
rsc-control at ebus0 addr 3062f8-3062ff ivec 0x2e not configured
com0 at ebus0 addr 3083f8-3083ff ivec 0x2d: ns16550a, 16 byte fifo
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 Sun ERI Ether rev 0x01: ivec 0x21d, address [_MAC_XXXXXXXXXX]
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
ohci0 at pci0 dev 5 function 3 Sun USB rev 0x01: ivec 0x21f, version 1.0, legacy support
siop0 at pci0 dev 6 function 0 Symbios Logic 53c875 rev 0x37: ivec 0x218, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2 5/cdrom removable
siop1 at pci0 dev 6 function 1 Symbios Logic 53c875 rev 0x37: ivec 0x219, using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
ppb0 at pci0 dev 1 function 0 Intel 21154AE/BE PCI-PCI rev 0x00
pci1 at ppb0 bus 1
Emulex LP9000 rev 0x01 at pci1 dev 4 function 0 not configured
Emulex LP9000 rev 0x01 at pci1 dev 5 function 0 not configured
ppb1 at pci0 dev 3 function 0 Intel 21154AE/BE PCI-PCI rev 0x00
pci2 at ppb1 bus 2
Sun PCIO EBus2 rev 0x01 at pci2 dev 0 function 0 not configured
hme0 at pci2 dev 0 function 1 Sun HME rev 0x01: ivec 0x215, address [_MAC_XXXXXXXXXX]
luphy1 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
Sun PCIO EBus2 rev 0x01 at pci2 dev 1 function 0 not configured
hme1 at pci2 dev 1 function 1 Sun HME rev 0x01: ivec 0x216, address [_MAC_XXXXXXXXXX]
luphy2 at hme1 phy 1: LU6612 10/100 PHY, rev. 1
Sun PCIO EBus2 rev 0x01 at pci2 dev 2 function 0 not configured
hme2 at pci2 dev 2 function 1 Sun HME rev 0x01: ivec 0x217, address [_MAC_XXXXXXXXXX]
luphy3 at hme2 phy 1: LU6612 10/100 PHY, rev. 1
Sun PCIO EBus2 rev 0x01 at pci2 dev 3 function 0 not configured
hme3 at pci2 dev 3 function 1 Sun HME rev 0x01: ivec 0x214, address [_MAC_XXXXXXXXXX]
luphy4 at hme3 phy 1: LU6612 10/100 PHY, rev. 1
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 Sun OHCI root hub rev 1.00/1.00 addr 1
schizo1 at mainbus0: Schizo, version 5, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci3 at schizo1
isp0 at pci3 dev 4 function 0 QLogic ISP2200 rev 0x05: ivec 0x204
isp0: board type 2200 rev 0x5, loaded firmware rev 2.2.6
scsibus2 at isp0: 512 targets, WWPN 21000003ba1866c3, WWNN 21000003ba1866c3
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST336605FSUN36G, 0638> SCSI3 0/direct fixed
sd0: 34732MB, 512 bytes/sec, 71132959 sec total
gfxp0 at pci3 dev 1 function 0 3D Labs Permedia 2v rev 0x01
gfxp0: GFXP, 1280x1024
wsdisplay0 at gfxp0: console (std, sun emulation)
rd0: fixed, 6144 blocks
uhidev0 at uhub0 port 2 configuration 1 interface 0 Dell Dell USB Keyboard rev 1.10/3.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
softraid0 at root
bootpath: /pci@8,700000/network@5,1
root on rd0a swap on rd0b dump on rd0b