Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2010-08-12 23:29:50
From: BSeklecki
Description: ZOTAC IONITX-A-U Atom 330 1.6GHz Dual-Core 441 NVIDIA ION Mini ITX
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.38 (GENERIC) #0: Thu Aug 12 02:25:27 EDT 2010
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/home/netbsd/obj.i386/20100811-2307EDT/sys/arch/i386/compile/GENERIC
total memory = 767 MB
avail memory = 742 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1600MHz, id 0x106c2
cpu1 at mainbus0 apid 2: Intel 686-class, 1600MHz, id 0x106c2
cpu2 at mainbus0 apid 1: Intel 686-class, 1600MHz, id 0x106c2
cpu3 at mainbus0 apid 3: Intel 686-class, 1600MHz, id 0x106c2
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100528
acpi0: X/RSDT: OemId <081309,RSDT0925,20090813>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter ACPI-Safe frequency 3579545 Hz quality 900
P001 (ACPI Object Type Processor [0x0c]) at acpi0 not configured
P002 (ACPI Object Type Processor [0x0c]) at acpi0 not configured
P003 (ACPI Object Type Processor [0x0c]) at acpi0 not configured
P004 (ACPI Object Type Processor [0x0c]) at acpi0 not configured
MUAR (PNP0501) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
RMSC (PNP0C02) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed00fff irq 2,8
timecounter: Timecounter hpet0 frequency 25000000 Hz quality 2000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
OMSC (PNP0C02) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI0, pnp0c14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
AWY (AWY0001) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
acpi0: invalid PCI address for XVS0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x10de product 0x0a82 (rev. 0xb1)
vendor 0x10de product 0x0a88 (RAM memory, revision 0xb1) at pci0 dev 0 function 1 not configured
pcib0 at pci0 dev 3 function 0: vendor 0x10de product 0x0aad (rev. 0xb2)
vendor 0x10de product 0x0aa4 (RAM memory, revision 0xb1) at pci0 dev 3 function 1 not configured
nfsmbc0 at pci0 dev 3 function 2: vendor 0x10de product 0x0aa2 (rev. 0xb1)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
vendor 0x10de product 0x0a89 (RAM memory, revision 0xb1) at pci0 dev 3 function 3 not configured
vendor 0x10de product 0x0aa3 (Co-processor processor, revision 0xb1) at pci0 dev 3 function 5 not configured
ohci0 at pci0 dev 4 function 0: vendor 0x10de product 0x0aa5 (rev. 0xb1)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 4 function 1: vendor 0x10de product 0x0aa6 (rev. 0xb1)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 12 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 6 function 0: vendor 0x10de product 0x0aa7 (rev. 0xb1)
UB11: Picked IRQ 22 with weight 0
ohci1: interrupting at ioapic0 pin 22
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 6 function 1: vendor 0x10de product 0x0aa9 (rev. 0xb1)
UB12: Picked IRQ 23 with weight 0
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS refuses to give up ownership, using force
ehci1: EHCI version 1.0
ehci1: companion controller, 12 ports each: ohci1
usb3 at ehci1: USB revision 2.0
hdaudio0 at pci0 dev 8 function 0: HD Audio Controller
LAZA: Picked IRQ 20 with weight 1
hdaudio0: interrupting at ioapic0 pin 20
hdafg0 at hdaudio0 vendor 0x10EC product 0x0662 nid 0x01 (firmware configuration)
hdafg0: DAC0:02, Analog Speaker: Jack (Green, 14)
hdafg0: DAC0:02, Analog HP Out: Jack (Green, 1B)
hdafg0: DAC1:06, Digital SPDIF Out: Jack (Black, 1E)
hdafg0: ADC2:08, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC2:08, Analog Mic In: Jack (Pink, 19)
hdafg0: ADC2:08, Analog Line In: Jack (Blue, 1A)
hdafg0: 2ch/2ch 44100Hz-96000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x10DE product 0x0007 nid 0x01 (firmware configuration)
hdafg1: DAC0:04, Digital Digital Other Out: Jack (Unknown, 05)
hdafg1: 2ch/0ch 48000Hz 16/16*
audio1 at hdafg1: full duplex, playback, capture, independent
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x0aab (rev. 0xb1)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
nfe0 at pci0 dev 10 function 0: vendor 0x10de product 0x0ab0 (rev. 0xb1)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address [_MAC_XXXXXXXXXX]
rgephy0 at nfe0 phy 3: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pciide0 at pci0 dev 11 function 0: vendor 0x10de product 0x0ab4 (rev. 0xb1)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
LSA0: Picked IRQ 22 with weight 1
pciide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
ppb1 at pci0 dev 12 function 0: vendor 0x10de product 0x0ac4 (rev. 0xb1)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 16 function 0: vendor 0x10de product 0x0aa0 (rev. 0xb1)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci3 dev 0 function 0: vendor 0x10de product 0x087d (rev. 0xb1)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb3 at pci0 dev 21 function 0: vendor 0x10de product 0x0ac6 (rev. 0xb1)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 4
pci4: memory space enabled, rd/line, wr/inv ok
vendor 0x168c product 0x002a (miscellaneous network, revision 0x01) at pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 22 function 0: vendor 0x10de product 0x0ac7 (rev. 0xb1)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5
pci5: no spaces enabled!
ppb5 at pci0 dev 23 function 0: vendor 0x10de product 0x0ac7 (rev. 0xb1)
ppb5: unsupported PCI Express version
pci6 at ppb5 bus 6
pci6: no spaces enabled!
ppb6 at pci0 dev 24 function 0: vendor 0x10de product 0x0ac7 (rev. 0xb1)
ppb6: unsupported PCI Express version
pci7 at ppb6 bus 7
pci7: no spaces enabled!
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
uhub2 at usb2: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0: <WDC WD20EARS-00MVWB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <ATAPI iHDS118 5, , RL08> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: Lexar SAFE PSD, rev 2.00/1.10, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Lexar, SAFE PSD, 1.10> disk removable
sd0: 1957 MB, 3930 cyl, 16 head, 63 sec, 512 bytes/sect x 4008816 sectors
Kernelized RAIDframe activated
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 2, iclass 3/1
ukbd0 at uhidev0
boot device: wd0
root on wd0a dumps on wd0b
wskbd0 at ukbd0: console keyboard, using wsdisplay0
/: replaying log to memory
root file system type: ffs