Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2010-09-15 18:05:34
From: Jonathan McCormack
Description: Gigabyte 6VTXE Motherboard
OpenBSD 4.7 (GENERIC) #1: Wed Apr 7 20:37:34 CEST 2010 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Ezra (CentaurHauls 686-class) 903 MHz cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX real mem = 536375296 (511MB) avail mem = 510996480 (487MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/03/02, BIOS32 rev. 0 @ 0xfdad0, SMBIOS rev. 2.3 @ 0xf0620 (31 entries) bios0: vendor American Megatrends Inc. version 6.27.10 date 05/03/2002 bios0: Gigabyte Technology Co., Ltd. 6VTXE / 6VTXE-A apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7790/176 (9 entries) pcibios0: PCI Interrupt Router at 000:07:0 (VIA VT82C686 ISA rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xfc00 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 VIA VT82C691 PCI rev 0xc4 viaagp0 at pchb0: v2 agp0 at viaagp0: aperture at 0xe0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0 VIA VT82C598 AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 NVIDIA GeForce4 MX 440 rev 0xa3 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 VIA VT82C686 ISA rev 0x40 pciide0 at pci0 dev 7 function 1 VIA VT82C571 IDE rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0> wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LITE-ON, COMBO LTC-48161H, KH0R> ATAPI 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 3 pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 7 function 2 VIA VT83C572 USB rev 0x1a: irq 9 viaenv0 at pci0 dev 7 function 4 VIA VT82C686 SMBus rev 0x40: 24-bit timer at 3579545Hz auvia0 at pci0 dev 7 function 5 VIA VT82C686 AC97 rev 0x50: irq 10 ac97: codec id 0x414c4710 (Avance Logic ALC200) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D audio0 at auvia0 VIA VT82C686 Modem rev 0x30 at pci0 dev 7 function 6 not configured Philips SAA7130 TV rev 0x01 at pci0 dev 10 function 0 not configured AT&T/Lucent FW322 1394 rev 0x04 at pci0 dev 11 function 0 not configured de0 at pci0 dev 12 function 0 DEC 21140 rev 0x20, DEC DE500-AA 21140A pass 2.0: irq 11, address xx:xx:xx:xx:xx:xx ral0 at pci0 dev 13 function 0 Ralink RT2661 rev 0x00: irq 5, address xx:xx:xx:xx:xx:xx ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR) isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb0 at uhci0: USB revision 1.0 uhub0 at usb0 VIA UHCI root hub rev 1.00/1.00 addr 1 biomask e345 netmask eb65 ttymask fbff mtrr: Pentium Pro MTRR support uhub1 at uhub0 port 1 NEC hub rev 2.00/1.00 addr 2 ugen0 at uhub1 port 1 Microsoft Wireless Networking Adapter rev 2.00/30.06 addr 3 ugen1 at uhub1 port 2 Microsoft product 0x028f rev 2.00/1.05 addr 4 ugen2 at uhub1 port 3 Microsoft Corporation Xbox 360 HD DVD Memory Unit rev 2.00/1.09 addr 5 umass0 at uhub1 port 4 configuration 1 interface 0 Microsoft Xbox 360 HD DVD Player rev 2.00/1.00 addr 6 umass0: using ATAPI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 cd1 at scsibus1 targ 1 lun 0: <TOSHIBA, DVD/HD X807616, MC08> ATAPI 5/cdrom removable uhidev0 at uhub0 port 2 configuration 1 interface 0 Sony PLAYSTATION(R)3 Controller rev 2.00/1.00 addr 7 uhidev0: iclass 3/0, 239 report ids uhid0 at uhidev0 reportid 1: input=48, output=48, feature=48 uhid1 at uhidev0 reportid 2: input=0, output=0, feature=48 uhid2 at uhidev0 reportid 238: input=0, output=0, feature=48 uhid3 at uhidev0 reportid 239: input=0, output=0, feature=48 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b hw.sensors.viaenv0.temp0=30.95 degC hw.sensors.viaenv0.temp1=27.40 degC hw.sensors.viaenv0.temp2=21.70 degC hw.sensors.viaenv0.fan0=4687 RPM hw.sensors.viaenv0.fan1=0 RPM hw.sensors.viaenv0.volt0=1.43 VDC (VSENS1) hw.sensors.viaenv0.volt1=1.04 VDC (VSENS2) hw.sensors.viaenv0.volt2=3.36 VDC (Vcore) hw.sensors.viaenv0.volt3=5.28 VDC (VSENS3) hw.sensors.viaenv0.volt4=12.37 VDC (VSENS4)