Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2010-11-25 16:25:22
From: Siraaj Khandkar
Description: KVM 83 (CentOS 5.5)
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: QEMU Virtual CPU version 0.9.1 (GenuineIntel 686-class) 2.88 GHz
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 536375296 (511MB)
avail mem = 517644288 (493MB)
User Kernel Config
UKC> disable mpbios
352 mpbios0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/03/10, BIOS32 rev. 0 @ 0xfb520, SMBIOS rev. 2.4 @ 0xfbdaf (10 entries)
bios0: vendor QEMU version QEMU date 01/01/2007
bios0: Red Hat KVM
acpi at bios0 function 0x0 not configured
mpbios at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb870/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:01:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8c00 0xc9000/0x600!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel 82441FX rev 0x02
pcib0 at pci0 dev 1 function 0 Intel 82371SB ISA rev 0x00
pciide0 at pci0 dev 1 function 1 Intel 82371SB IDE rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 10300MB, 21094400 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.9.> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 Intel 82371SB USB rev 0x01: irq 11
vga1 at pci0 dev 2 function 0 Cirrus Logic CL-GD5446 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 Intel PRO/1000MT (82540EM) rev 0x03: irq 11, address [_MAC_XXXXXXXXXX]
Qumranet Virtio Memory rev 0x00 at pci0 dev 4 function 0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 Intel UHCI root hub rev 1.00/1.00 addr 1
biomask efed netmask efed ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout