Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2011-04-20 08:37:45
From: Sevan / Venture37
Description: Thinkpad X61s 7666-34G without ultrabay attached
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Mon Apr 18 16:18:49 BST 2011
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/THINKPAD amd64
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz (1596.04-MHz K8-class CPU)
Origin = GenuineIntel Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 2004402176 (1911 MB)
Event timer LAPIC quality 400
ACPI APIC Table: <LENOVO TP-7N >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110413/tbfadt-556)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110413/tbfadt-586)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-7N> on motherboard
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7df00000 (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci1: <VGA-compatible display> mem 0xf8100000-0xf81fffff at device 2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
acquiring duplicate lock of same type: network driver
1st &dev_spec->swflag_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:785
2nd &dev_spec->nvm_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:751
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x37
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x8de
_mtx_lock_flags() at _mtx_lock_flags+0x79
e1000_acquire_nvm_ich8lan() at e1000_acquire_nvm_ich8lan+0x1e
e1000_read_nvm_ich8lan() at e1000_read_nvm_ich8lan+0x76
e1000_post_phy_reset_ich8lan() at e1000_post_phy_reset_ich8lan+0x1b1
e1000_reset_hw_ich8lan() at e1000_reset_hw_ich8lan+0x4c1
em_attach() at em_attach+0x11bd
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pci_attach() at acpi_pci_attach+0x14f
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pcib_attach() at acpi_pcib_attach+0x1a7
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0x1fd
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_attach() at acpi_attach+0xbc5
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
nexus_acpi_attach() at nexus_acpi_attach+0x69
device_attach() at device_attach+0x69
bus_generic_new_pass() at bus_generic_new_pass+0xd6
bus_set_pass() at bus_set_pass+0x7a
configure() at configure+0xa
mi_startup() at mi_startup+0x77
btext() at btext+0x2c
em0: Ethernet address: [_MAC_XXXXXXXXXX]
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network> at device 0.0 (no driver attached)
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci5
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xd7efe800-0xd7efefff irq 17 at device 0.1 on pci5
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:f1:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1658000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: [_MAC_XXXXXXXXXX]:f1:ff @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci5: <base peripheral, SD host controller> at device 0.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 3 1.5Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter i8254 frequency 1193182 Hz quality 0
Event timer i8254 frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter HPET frequency 14318180 Hz quality 900
Event timer HPET frequency 14318180 Hz quality 450
Event timer HPET1 frequency 14318180 Hz quality 440
Event timer HPET2 frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer RTC frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ad4: 114473MB <HITACHI HTS541612J9SA00 SBDIC7VP> at ata2-master UDMA100 SATA 1.5Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
hdac0: HDA Codec #0: Analog Devices AD1984
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
GEOM: ad4s1: invalid entries in the EBR ignored.
GEOM: ad4s1: EBR has non empty bootcode.
GEOM: ad4s4: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad4s4: invalid disklabel.
uhub2: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen0.2: <Broadcom Corp> at usbus0
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s3a [rw]...