Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2011-05-21 10:18:10
From: FAndrey
Description: lenovo thinkpad sl400 + debug(not boot 64bit)
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:55:53 UTC 2010
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel /boot/kernel/kernel at 0xc0fb7000.
Timecounter i8254 frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1795511619 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz (1795.51-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000007b9f4fff, 2057105408 bytes (502223 pages)
avail memory = 2055778304 (1960 MB)
Table FACP at 0x7ddb0290
Table APIC at 0x7ddb0390
APIC: Found table at 0x7ddb0390
MP Configuration Table version 1.4 found at 0xc00e90e0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <LENOVO TP-6A   >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
x86bios:   IVT 0x000000-0x0004ff at 0xc0000000
x86bios:  SSEG 0x010000-0x01ffff at 0xc512d000
x86bios:  EBDA 0x09e000-0x09ffff at 0xc009e000
x86bios:   ROM 0x0a0000-0x0effff at 0xc00a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5990
pnpbios: Entry = f0000:6cea  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf92d0 00024 (v2 ACPIAM)
ACPI: XSDT 0x7ddb0100 00084 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: FACP 0x7ddb0290 000F4 (v3 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: DSDT 0x7ddb0680 0BD50 (v1  LENOV TP-6A    00000180 INTL 20051117)
ACPI: FACS 0x7ddbe400 00040
ACPI: APIC 0x7ddb0390 0005C (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: MCFG 0x7ddb0430 0003C (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: SLIC 0x7ddb0470 00176 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: ECDT 0x7ddb0620 00054 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: DBGP 0x7ddb03f0 00034 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: BOOT 0x7ddb05f0 00028 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: OEMB 0x7ddbe440 00071 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: HPET 0x7ddbc3d0 00038 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: GSCI 0x7ddbe4c0 02024 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: ATKG 0x7ddc06f0 08024 (v1 LENOVO TP-6A    00000480 MSFT 00000097)
ACPI: SSDT 0x7ddc9240 004E6 (v1  PmRef TP-6A    00000180 INTL 20051117)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259As -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
acpi0: <LENOVO TP-6A> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 3.00
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc5127000 pa 0x1000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [SSDT] - 0x4A, should be 0xD9 (20100331/tbutils-354)
ACPI Warning: Incorrect checksum in table [ATKG] - 0xC6, should be 0x64 (20100331/tbutils-354)
ACPI: SSDT 0x7ddc87f0 00244 (v1  PmRef TP-6A    00000180 INTL 20051117)
ACPI: SSDT 0x7ddc8ad0 00765 (v1  PmRef  Cpu0Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [SSDT] - 0x37, should be 0xC7 (20100331/tbutils-354)
ACPI: SSDT 0x7ddc8720 000C8 (v1  PmRef TP-6A    00000180 INTL 20051117)
ACPI: SSDT 0x7ddc8a40 00085 (v1  PmRef  Cpu1Cst 00003000 INTL 20051117)
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12
  Validation          0   10   N     0  3 4 5 6 7 10 11 12
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 10 12
  Validation          0    5   N     0  3 4 5 10 12
  After Disable       0  255   N     0  3 4 5 10 12
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  6
  Validation          0    6   N     0  6
  After Disable       0  255   N     0  6
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 7 10 12
  Validation          0    3   N     0  3 4 5 7 10 12
  After Disable       0  255   N     0  3 4 5 7 10 12
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  6
  Validation          0  255   N     0  6
  After Disable       0  255   N     0  6
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 6 7 10 12
  Validation          0    7   N     0  3 4 5 6 7 10 12
  After Disable       0  255   N     0  3 4 5 6 7 10 12
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    4   N     0  3 4 5 6 7 10 12
  Validation          0    4   N     0  3 4 5 6 7 10 12
  After Disable       0  255   N     0  3 4 5 6 7 10 12
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 12
  Validation          0   10   N     0  3 4 5 6 7 10 12
  After Disable       0  255   N     0  3 4 5 6 7 10 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
Timecounter HPET frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a42, revid=0x07
        domain=0, bus=0, slot=2, func=0
        class=03-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type Memory, range 64, base 0xfdc00000, size 22, enabled
        map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
        map[20]: type I/O Port, range 32, base 0x5c00, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a43, revid=0x07
        domain=0, bus=0, slot=2, func=1
        class=03-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 3  supports D0 D3  current D0
        map[10]: type Memory, range 64, base 0xfdb00000, size 20, enabled
found-> vendor=0x8086, dev=0x2937, revid=0x03
        domain=0, bus=0, slot=26, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[20]: type I/O Port, range 32, base 0x5880, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5880
found-> vendor=0x8086, dev=0x2938, revid=0x03
        domain=0, bus=0, slot=26, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=7
        map[20]: type I/O Port, range 32, base 0x5800, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5800
found-> vendor=0x8086, dev=0x2939, revid=0x03
        domain=0, bus=0, slot=26, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=3
        map[20]: type I/O Port, range 32, base 0x5480, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5480
found-> vendor=0x8086, dev=0x293c, revid=0x03
        domain=0, bus=0, slot=26, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=6
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xfe0fbc00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe0fbc00
found-> vendor=0x8086, dev=0x293e, revid=0x03
        domain=0, bus=0, slot=27, func=0
        class=04-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=4
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xfe0f4000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
        domain=0, bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2942, revid=0x03
        domain=0, bus=0, slot=28, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2944, revid=0x03
        domain=0, bus=0, slot=28, func=2
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=6
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2946, revid=0x03
        domain=0, bus=0, slot=28, func=3
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=3
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2934, revid=0x03
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[20]: type I/O Port, range 32, base 0x5400, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5400
found-> vendor=0x8086, dev=0x2935, revid=0x03
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=3
        map[20]: type I/O Port, range 32, base 0x5080, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5080
found-> vendor=0x8086, dev=0x2936, revid=0x03
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=6
        map[20]: type I/O Port, range 32, base 0x5000, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5000
found-> vendor=0x8086, dev=0x293a, revid=0x03
        domain=0, bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xfe0fb800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe0fb800
found-> vendor=0x8086, dev=0x2448, revid=0x93
        domain=0, bus=0, slot=30, func=0
        class=06-04-01, hdrtype=0x01, mfdev=0
        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2919, revid=0x03
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2929, revid=0x03
        domain=0, bus=0, slot=31, func=2
        class=01-06-01, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=3
        powerspec 3  supports D0 D3  current D0
        MSI supports 16 messages
        map[10]: type I/O Port, range 32, base 0x4c00, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x4880, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x4800, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x4480, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x4400, size  5, enabled
        map[24]: type Memory, range 32, base 0xfe0fb000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x5c00-0x5c07 mem 0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Lazy allocation of 0x400000 bytes rid 0x10 type 3 at 0x80000000
vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0x80000000
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x5880-0x589f irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x5800-0x581f irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x5480-0x549f irq 19 at device 26.2 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe0fbc00-0xfe0fbfff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0xfe100000-0xfe1fffff
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x8086, dev=0x4237, revid=0x00
        domain=0, bus=2, slot=0, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xfe1fe000, size 13, enabled
pcib2: requested memory range 0xfe1fe000-0xfe1fffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   11
pcib3:   I/O decode        0x6000-0xdfff
pcib3:   memory decode     0xfe200000-0xfe9fffff
pcib3:   prefetched decode 0xfc700000-0xfcefffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     12
pcib4:   subordinate bus   12
pcib4:   I/O decode        0xe000-0xefff
pcib4:   memory decode     0xfea00000-0xfeafffff
pcib4:   prefetched decode 0xfcf00000-0xfcffffff
pci12: <ACPI PCI bus> on pcib4
pci12: domain=0, physical bus=12
found-> vendor=0x10ec, dev=0x8168, revid=0x02
        domain=0, bus=12, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=3
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        MSI-X supports 2 messages in map 0x20
        map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib4: requested I/O range 0xe800-0xe8ff: in range
        map[18]: type Prefetchable Memory, range 64, base 0xfcfff000, size 12, enabled
pcib4: requested memory range 0xfcfff000-0xfcffffff: good
        map[20]: type Prefetchable Memory, range 64, base 0xfcfe0000, size 16, enabled
pcib4: requested memory range 0xfcfe0000-0xfcfeffff: good
pcib4: matched entry for 12.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcfff000-0xfcffffff,0xfcfe0000
-0xfcfeffff irq 19 at device 0.0 on pci12
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfcfff000
re0: MSI count : 2
re0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 54
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: [MPSAFE]
re0: [FILTER]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x5400-0x541f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 19 at device 29.1 on pci0
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x5000-0x501f irq 18 at device 29.2 on pci0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe0fb800-0xfe0fbbff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     13
pcib5:   subordinate bus   13
pcib5:   I/O decode        0x0-0x0
pcib5:   memory decode     0xfeb00000-0xfebfffff
pcib5:   no prefetched decode
pcib5:   Subtractively decoded bridge.
pci13: <ACPI PCI bus> on pcib5
pci13: domain=0, physical bus=13
found-> vendor=0x1180, dev=0x0832, revid=0x05
        domain=0, bus=13, slot=0, func=0
        class=0c-00-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled
pcib5: requested memory range 0xfebff800-0xfebfffff: good
pcib5: matched entry for 13.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1180, dev=0x0822, revid=0x22
        domain=0, bus=13, slot=0, func=1
        class=08-05-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfebff400, size  8, enabled
pcib5: requested memory range 0xfebff400-0xfebff4ff: good
pcib5: matched entry for 13.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0843, revid=0x12
        domain=0, bus=13, slot=0, func=2
        class=08-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfebff000, size  8, enabled
pcib5: requested memory range 0xfebff000-0xfebff0ff: good
pcib5: matched entry for 13.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0592, revid=0x12
        domain=0, bus=13, slot=0, func=3
        class=08-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfebfec00, size  8, enabled
pcib5: requested memory range 0xfebfec00-0xfebfecff: good
pcib5: matched entry for 13.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0852, revid=0x12
        domain=0, bus=13, slot=0, func=4
        class=08-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xfebfe800, size  8, enabled
pcib5: requested memory range 0xfebfe800-0xfebfe8ff: good
pcib5: matched entry for 13.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xfebff800-0xfebfffff irq 16 at device 0.0 on pci13
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfebff800
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:55:62
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7b98c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: bpf attached
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: xx:xx:xx:xx:xx:xx:55:62 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci13: <base peripheral, SD host controller> at device 0.1 (no driver attached)
pci13: <base peripheral> at device 0.2 (no driver attached)
pci13: <base peripheral> at device 0.3 (no driver attached)
pci13: <base peripheral> at device 0.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel (ID=29298086) AHCI controller> port 0x4c00-0x4c07,0x4880-0x4883,0x4800-0x4807,0x4480-0x4483,0x4400-0
x441f mem 0xfe0fb000-0xfe0fb7ff irq 19 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4400
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfe0fb000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 4ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=10ms status=00000113
ata2: ready wait time=0ms
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: ready wait time=0ms
ata3: software reset port 0...
ata3: ready wait time=0ms
ata3: SIGNATURE: eb140101
ata3: AHCI reset done: devices=00010000
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect timeout status=00000000
ata4: AHCI reset done: phy reset found no device
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: [MPSAFE]
ata5: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Warning for \\_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20
100331/nspredef-1197)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58
ata1: [MPSAFE]
ata1: [ITHREAD]
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (2605, 2341)
est0: Cant check freq 1801, it may be invalid
est0: Invalid id16 (set, cur) = (34831, 1559)
est0: Cant check freq 800, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (2605, 2341)
est1: Cant check freq 1801, it may be invalid
est1: Invalid id16 (set, cur) = (34831, 1559)
est1: Cant check freq 800, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
Reducing kern.maxvnodes 131951 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750651 Hz
Timecounter TSC frequency 1795511619 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000000
ata0: firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: setting UDMA100
ad4: 152627MB <FUJITSU MHZ2160BH G1 0084000A> at ata2-master UDMA100 SATA 1.5Gb/s
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7

battery0: battery initialization done, tried 1 times
ad4: Intel check1 failed
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ad4: Adaptec check1 failed
uhub6: 2 ports with 2 removable, self powered
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00010000
ata3: New devices: 00010000
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not start on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting UDMA33
ata3: device_reset timeout=250us
acd0: <MATSHITADVD-RAM UJ870A/SB23> DVDR drive at ata3 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 SATA 1.5Gb/s
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <Kingston> at usbus7
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass0:0:0:-1: Attached to scbus0
GEOM: new disk da0pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0

pass0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
pass0: Serial Number xxxxxxxx
pass0: 40.000MB/s transfers
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: 1906MB (3905407 512 byte sectors: 255H 63S/T 243C)
ugen2.2: <Lenovo Computer Corp> at usbus2
Root mount waiting for: usbus7
ugen7.3: <vendor 0x17ef> at usbus7