Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2011-06-06 16:35:30
From: Dave Anderson
Description: hp g62-435dx notebook
OpenBSD 4.9-current (GENERIC) #3: Mon May 23 21:40:58 MDT 2011
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: AMD Turion(tm) II P540 Dual-Core Processor (AuthenticAMD 686-class, 1024KB L2 cache) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT
real mem = 3752648704 (3578MB)
avail mem = 3680505856 (3510MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/07/10, SMBIOS rev. 2.6 @ 0xe8330 (22 entries)
bios0: vendor Hewlett-Packard version F.17 date 11/07/2010
bios0: Hewlett-Packard HP G62 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf7000000, bus 0-15
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB5_)
acpiprt5 at acpi0: bus 3 (PB6_)
acpiprt6 at acpi0: bus 4 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model Primary serial type LION oem Hewlett-Packard
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
bios0: ROM list: 0xc0000/0xee00
cpu0: 2395 MHz: speeds: 2400 2200 1900 1500 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 AMD RS780 Host rev 0x00
ppb0 at pci0 dev 1 function 0 AMD RS780 PCIE rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 ATI Mobility Radeon HD 4200 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 4 int 18
drm0 at radeondrm0
azalia0 at pci1 dev 5 function 1 ATI Radeon HD 4200 HD Audio rev 0x00: apic 4 int 19
azalia0: no supported codecs
ppb1 at pci0 dev 5 function 0 AMD RS780 PCIE rev 0x00: apic 4 int 17
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 Atheros AR9285 rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address [_MAC_XXXXXXXXXX]
ppb2 at pci0 dev 6 function 0 AMD RS780 PCIE rev 0x00: apic 4 int 18
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 Realtek 8101E rev 0x02: RTL8102EL (0x2480), apic 4 int 18, address [_MAC_XXXXXXXXXX]
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 17 function 0 ATI SBx00 SATA rev 0x00: apic 4 int 19, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9320325AS, 0005> SCSI3 0/direct fixed naa.5000c500306d7c64
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0200> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 ATI SB700 USB rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 ATI SB700 USB2 rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 ATI EHCI root hub rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 ATI SB700 USB rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 ATI SB700 USB2 rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 ATI EHCI root hub rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 ATI SBx00 SMBus rev 0x42: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 ATI SBx00 HD Audio rev 0x40: apic 4 int 16
azalia1: codecs: Realtek/0x0270
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 ATI SB700 ISA rev 0x40
ppb3 at pci0 dev 20 function 4 ATI SB600 PCI rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 ATI SB700 USB rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 ATI SB700 USB rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 ATI SB700 USB2 rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 ATI EHCI root hub rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 AMD AMD64 10h HyperTransport rev 0x00
pchb2 at pci0 dev 24 function 1 AMD AMD64 10h Address Map rev 0x00
pchb3 at pci0 dev 24 function 2 AMD AMD64 10h DRAM Cfg rev 0x00
km0 at pci0 dev 24 function 3 AMD AMD64 10h Misc Cfg rev 0x00
pchb4 at pci0 dev 24 function 4 AMD AMD64 10h Link Cfg rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 ATI OHCI root hub rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 ATI OHCI root hub rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 ATI OHCI root hub rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 ATI OHCI root hub rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 3 configuration 1 interface 0 SuYin HP Webcam-101 rev 2.00/4.21 addr 2
video0 at uvideo0
umass0 at uhub1 port 2 configuration 1 interface 0 HP v125w rev 2.00/40.96 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <hp, v125w, 4096> SCSI0 0/direct removable serial.03f03307104A00000902
sd1: 3864MB, 512 bytes/sec, 7913472 sec total
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd1a (e0166bb8f33fc15d.a) swap on sd1b dump on sd1b