Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2011-06-09 01:08:27
From: yendor
Description: Samsung NC20
Pity about the Atheros wi-fi. Id change it if it wasnt buried up behind the screen somewhere. Dont care about the SD/MM reader.
 X gets the correct screen resolution. Ill grab something better than fvwm (IMNSHO) when i get an up-to-date package set. 8-))

OpenBSD 4.9-current (GENERIC) #37: Mon Jun  6 14:22:30 MDT 2011
cpu0: VIA Nano processor U2250@1300+MHz (CentaurHauls 686-class) 1.60 GHz
real mem  = 1877331968 (1790MB)
avail mem = 1836445696 (1751MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/09, BIOS32 rev. 0 @ 0xfdb04, SMBIOS rev. 2.5 @ 0xdf010 (51 entries)
bios0: vendor Phoenix Technologies Ltd. version 09MQ date 04/22/2009
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: wakeup devices PWRB(S5) PER1(S3) MBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfecc0000, version 3, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGC)
acpiprt2 at acpi0: bus 1 (PE0C)
acpiprt3 at acpi0: bus 2 (PE1C)
acpiprt4 at acpi0: bus -1 (SP2P)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: FN00
acpitz0 at acpi0: critical temperature 95 degC
acpitz1 at acpi0: critical temperature 95 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 type LION oem SAMSUNG Electronics
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xe800 0xce800/0x1000 0xdf000/0x1000!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 VIA VX800 Host rev 0x12
pchb1 at pci0 dev 0 function 1 VIA VX800 Host rev 0x00
pchb2 at pci0 dev 0 function 2 VIA VX800 Host rev 0x00
pchb3 at pci0 dev 0 function 3 VIA VX800 DRAM rev 0x00
pchb4 at pci0 dev 0 function 4 VIA VX800 Host rev 0x00
VIA VX800 IOAPIC rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 VIA VX800 Host rev 0x00
pchb6 at pci0 dev 0 function 7 VIA VX800 Host rev 0x00
vga1 at pci0 dev 1 function 0 VIA Chrome9 HC3 IGP rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 3 function 0 VIA VX800 PCIE rev 0x00: apic 2 int 7
pci1 at ppb0 bus 1
ath0 at pci1 dev 0 function 0 Atheros AR5424 rev 0x01: apic 2 int 4
ath0: AR5424 14.2 phy 7.0 rf 0.0, EU1W, address xx:xx:xx:xx:xx:xx
ppb1 at pci0 dev 3 function 1 VIA VX800 PCIE rev 0x00: apic 2 int 15
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 Marvell Yukon 88E8040 rev 0x13, Yukon-2 FE+ rev. A0 (0x0): apic 2 int 12
msk0 at mskc0 port A: address xx:xx:xx:xx:xx:xx
eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0
VIA VX800 SD/MMC rev 0x00 at pci0 dev 13 function 0 not configured
pciide0 at pci0 dev 15 function 0 VIA CX700 IDE rev 0x00: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HI>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0xa0: apic 1 int 20
uhci1 at pci0 dev 16 function 1 VIA VT83C572 USB rev 0xa0: apic 1 int 22
uhci2 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0xa0: apic 1 int 21
ehci0 at pci0 dev 16 function 4 VIA VT6202 USB rev 0x90: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 VIA EHCI root hub rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 VIA VX800 ISA rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
pchb7 at pci0 dev 17 function 7 VIA VX800 Host rev 0x00
azalia0 at pci0 dev 20 function 0 VIA HD Audio rev 0x20: apic 1 int 17
azalia0: codecs: Realtek ALC272
audio0 at azalia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 VIA UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 VIA UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 VIA UHCI root hub rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 2 configuration 1 interface 0 TSSTcorp USB Mass Storage Device rev 2.00/6.10 addr 2
umass0: using ATAPI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, CDDVDW SE-S084B, TS00> ATAPI 5/cdrom removable serial.13fd0841M0000006b327
uvideo0 at uhub0 port 4 configuration 1 interface 0 Vimicro Corp. Namuga 1.3M Webcam rev 2.00/1.00 addr 3
video0 at uvideo0
ugen0 at uhub3 port 2 Broadcom Corp BCM92045NMD rev 2.00/3.54 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (2f8400b75fcc6cc8.a) swap on wd0b dump on wd0b
hw.sensors.cpu0.temp0=51.00 degC
hw.sensors.acpitz0.temp0=52.00 degC (zone temperature)
hw.sensors.acpitz1.temp0=52.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=11.34 VDC (voltage)
hw.sensors.acpibat0.volt1=12.52 VDC (current voltage)
hw.sensors.acpibat0.amphour0=5.70 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.00 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.17 Ah (low capacity)
hw.sensors.acpibat0.amphour3=5.53 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery idle), OK
hw.sensors.acpibat0.raw1=0 (rate)