Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2011-09-06 13:42:41
From: ike
Description: Soekris 4801, IDE HD
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Jun 21 16:27:49 EDT 2011
    xxx@xxx.xxx:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.66-MHz 586-class CPU)
  Origin = Geode by NSC  Id = 0x540  Family = 5  Model = 4  Stepping = 0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory  = 268435456 (256 MB)
avail memory = 243437568 (232 MB)
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0708970, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0708a10, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc087b830, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0708ab0, 0) error 1
ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: [ITHREAD]
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1
nsphyter1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: [ITHREAD]
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2
nsphyter2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: [ITHREAD]
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pci1: <PCI bus> on pcib1
sis3: <NatSemi DP8381[56] 10/100BaseTX> port 0xd000-0xd0ff mem 0xa4000000-0xa4000fff irq 5 at device 0.0 on pci1
sis3: Silicon Revision: DP83816A
miibus3: <MII bus> on sis3
nsphyter3: <DP83815 10/100 media interface> PHY 0 on miibus3
nsphyter3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis3: [ITHREAD]
sis4: <NatSemi DP8381[56] 10/100BaseTX> port 0xd100-0xd1ff mem 0xa4001000-0xa4001fff irq 11 at device 1.0 on pci1
sis4: Silicon Revision: DP83816A
miibus4: <MII bus> on sis4
nsphyter4: <DP83815 10/100 media interface> PHY 0 on miibus4
nsphyter4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis4: [ITHREAD]
sis5: <NatSemi DP8381[56] 10/100BaseTX> port 0xd200-0xd2ff mem 0xa4002000-0xa4002fff irq 5 at device 2.0 on pci1
sis5: Silicon Revision: DP83816A
miibus5: <MII bus> on sis5
nsphyter5: <DP83815 10/100 media interface> PHY 0 on miibus5
nsphyter5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis5: [ITHREAD]
sis6: <NatSemi DP8381[56] 10/100BaseTX> port 0xd300-0xd3ff mem 0xa4003000-0xa4003fff irq 11 at device 3.0 on pci1
sis6: Silicon Revision: DP83816A
miibus6: <MII bus> on sis6
nsphyter6: <DP83815 10/100 media interface> PHY 0 on miibus6
nsphyter6:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis6: [ITHREAD]
Geode Soekris net4801 comBIOS ver. 1.28 20050529 Copyright (C) 2000-2005
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
Timecounter Geode frequency 27000000 Hz quality 1000
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11 at device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
ad0: 76319MB <TOSHIBA MK8026GAX PA001G> at ata0-master UDMA33 
ugen0.1: <(0x0e11)> at usbus0
uhub0: <(0x0e11) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 3 ports with 3 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru to stop...done
Waiting (max 60 seconds) for system process `bufdaemon to stop...done
Waiting (max 60 seconds) for system process `syncer to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Uptime: 14m47s
Rebooting...
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Jun 21 16:27:49 EDT 2011
    xxx@xxx.xxx:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.67-MHz 586-class CPU)
  Origin = Geode by NSC  Id = 0x540  Family = 5  Model = 4  Stepping = 0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory  = 268435456 (256 MB)
avail memory = 243437568 (232 MB)
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0708970, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0708a10, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc087b830, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0708ab0, 0) error 1
ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: [ITHREAD]
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1
nsphyter1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: [ITHREAD]
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2
nsphyter2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: [ITHREAD]
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pci1: <PCI bus> on pcib1
sis3: <NatSemi DP8381[56] 10/100BaseTX> port 0xd000-0xd0ff mem 0xa4000000-0xa4000fff irq 5 at device 0.0 on pci1
sis3: Silicon Revision: DP83816A
miibus3: <MII bus> on sis3
nsphyter3: <DP83815 10/100 media interface> PHY 0 on miibus3
nsphyter3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis3: [ITHREAD]
sis4: <NatSemi DP8381[56] 10/100BaseTX> port 0xd100-0xd1ff mem 0xa4001000-0xa4001fff irq 11 at device 1.0 on pci1
sis4: Silicon Revision: DP83816A
miibus4: <MII bus> on sis4
nsphyter4: <DP83815 10/100 media interface> PHY 0 on miibus4
nsphyter4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis4: [ITHREAD]
sis5: <NatSemi DP8381[56] 10/100BaseTX> port 0xd200-0xd2ff mem 0xa4002000-0xa4002fff irq 5 at device 2.0 on pci1
sis5: Silicon Revision: DP83816A
miibus5: <MII bus> on sis5
nsphyter5: <DP83815 10/100 media interface> PHY 0 on miibus5
nsphyter5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis5: [ITHREAD]
sis6: <NatSemi DP8381[56] 10/100BaseTX> port 0xd300-0xd3ff mem 0xa4003000-0xa4003fff irq 11 at device 3.0 on pci1
sis6: Silicon Revision: DP83816A
miibus6: <MII bus> on sis6
nsphyter6: <DP83815 10/100 media interface> PHY 0 on miibus6
nsphyter6:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis6: [ITHREAD]
Geode Soekris net4801 comBIOS ver. 1.28 20050529 Copyright (C) 2000-2005
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
Timecounter Geode frequency 27000000 Hz quality 1000
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11 at device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
ad0: 76319MB <TOSHIBA MK8026GAX PA001G> at ata0-master UDMA33 
ugen0.1: <(0x0e11)> at usbus0
uhub0: <(0x0e11) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus0
uhub0: 3 ports with 3 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
sis2: link state changed to UP
pflog0: promiscuous mode enabled
sis1: link state changed to DOWN
sis3: link state changed to DOWN
sis4: link state changed to DOWN
sis5: link state changed to DOWN
sis6: link state changed to DOWN
sis1: link state changed to UP
arpresolve: cant allocate llinfo for xxx.xxx.xxx.xxx