Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2012-01-29 14:29:06
From: NickBeee
Description: Toshiba Portege 3110CT
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1 (PORTEGE_G1) #0: Sat Nov 5 20:19:50 GMT 2011
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/PORTEGE_G1
total memory = 65020 KB
avail memory = 57660 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
TOSHIBA P3110CT/6.4 (Version 1.0)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 299MHz, id 0x66a
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId , AslId
LNKA: ACPI: Found matching pin for 0.11.INTA at func 0: 255
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 3
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter ACPI-Safe frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (PIT, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
npx0 at acpi0 (NDP, PNP0C04): io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
FDD (PNP0700) at acpi0 not configured
COM (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: (null), Li-ION , XM2020P02 1000020420
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
VALD (TOS6200) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 96.0C active cooling level 1: 96.0C critical 97.0C passive 29.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7194 (rev. 0x01)
vga1 at pci0 dev 4 function 0: vendor 0x1023 product 0x9525 (rev. 0x49)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x7198 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 0 not configured
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x719a (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x719b (rev. 0x00)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: vendor 0x1179 product 0x0617 (rev. 0x20)
esm0 at pci0 dev 12 function 0: vendor 0x125d product 0x1978 (rev. 0x10)
esm0: interrupting at irq 11
esm0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esm0: full duplex, playback, capture, mmap, independent
vendor 0x11c1 product 0x0441 (miscellaneous communications, revision 0x01) at pci0 dev 13 function 0 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
re0 at cardbus0 function 0: Realtek 10/100/1000baseT
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wd0 at atabus0 drive 0:
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)