Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2012-03-01 16:01:30
From: Okan Demirmen
Description: IBM Thinkpad X40 2382-HCU
OpenBSD 5.1 (GENERIC) #160: Sun Feb 12 09:46:33 MST 2012 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.40GHz ("GenuineIntel" 686-class) 1.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 real mem = 1600581632 (1526MB) avail mem = 1564299264 (1491MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/21/06, BIOS32 rev. 0 @ 0xfd740, SMBIOS rev. 2.33 @ 0xe0010 (56 entries) bios0: vendor IBM version "1UETD3WW (2.08 )" date 12/21/2006 bios0: IBM 2382HCU apm0 at bios0: Power Management spec V1.2 acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000 0xcd800/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0: (uniprocessor) cpu0: Enhanced SpeedStep 1396 MHz: speeds: 1400, 1300, 1200, 1100, 1000, 900, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) io address conflict 0x5800/0x8 io address conflict 0x5808/0x4 io address conflict 0x5810/0x8 io address conflict 0x580c/0x4 mem address conflict 0x5f700000/0x400 pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02 "Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x8000000 inteldrm0 at vga1: irq 11 drm0 at inteldrm0 "Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci1 at ppb0 bus 2 mem address conflict 0xb0000000/0x1000 cbb0 at pci1 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11 sdhc0 at pci1 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11 sdmmc0 at sdhc0 em0 at pci1 dev 1 function 0 "Intel PRO/1000MT Mobile (82541GI)" rev 0x00: irq 11, address xx:xx:xx:xx:xx:xx ral0 at pci1 dev 2 function 0 "Ralink RT2860" rev 0x00: irq 11, address xx:xx:xx:xx:xx:xx ral0: MAC/BBP RT2860 (rev 0x0102), RF RT2820 (MIMO 2T3R) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <KingSpec KSD-PA18.1-064MJ> wd0: 1-sector PIO, LBA48, 61600MB, 126156800 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (4a8626191613b971.a) swap on wd0b dump on wd0b sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd0: 44171MB, 512 bytes/sector, 90462416 sectors