Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2012-03-04 00:36:49
From: herauthon
Description: Asus M4A89GTD PRO/USB3 - AMD Phenom II 1055T
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1.2 (GENERIC) #0: Thu Feb 2 12:12:28 UTC 2012
[_EMAIL_XXXXXXXXXXX]:/home/builds/ab/netbsd-5-1-2-RELEASE/amd64/201202021012Z-obj/home/builds/ab/netbsd-5-1-2-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 4094 MB
avail memory = 3953 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter i8254 frequency 1193182 Hz quality 100
SMBIOS rev. 2.6 @ 0x9f400 (70 entries)
System manufacturer System Product Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2809MHz, id 0x100fa0
cpu1 at mainbus0 apid 1: AMD 686-class, 2809MHz, id 0x100fa0
cpu2 at mainbus0 apid 2: AMD 686-class, 2809MHz, id 0x100fa0
cpu3 at mainbus0 apid 3: AMD 686-class, 2809MHz, id 0x100fa0
cpu4 at mainbus0 apid 4: AMD 686-class, 2809MHz, id 0x100fa0
cpu5 at mainbus0 apid 5: AMD 686-class, 2809MHz, id 0x100fa0
ioapic0 at mainbus0 apid 6: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <061311,XSDT1936,20110613>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter ACPI-Fast frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter hpet0 frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1022 product 0x9603 (rev. 0x00)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0641 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb1 at pci0 dev 9 function 0: vendor 0x1022 product 0x9608 (rev. 0x00)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
vendor 0x1033 product 0x0194 (USB serial bus, interface 0x30, revision 0x03) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci3 dev 0 function 0: vendor 0x197b product 0x2361
jmide0: 1 PATA port, 1 SATA port
jmide0: interrupting at ioapic0 pin 18
ahcisata0 at jmide0
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is unused
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is PATA
atabus2 at jmide0 channel 1
ixpide0 at pci0 dev 17 function 0
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x40)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 19 for native-PCI interrupt
atabus3 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus4 at ixpide0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x41)
piixpm0: SMBus disabled
ixpide1 at pci0 dev 20 function 1
ixpide1: ATI Technologies IXP IDE Controller (rev. 0x40)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at ioapic0 pin 14
atabus5 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at ioapic0 pin 15
atabus6 at ixpide1 channel 1
azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x1002/0x4383 (rev. 64), HDA rev. 1.0
pcib0 at pci0 dev 20 function 3
pcib0: vendor 0x1002 product 0x439d (rev. 0x40)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 7 function 0: vendor 0x1106 product 0x3044 (rev. 0xc0)
fwohci0: interrupting at ioapic0 pin 22
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:f2:cd
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ppb4 at pci0 dev 21 function 0: vendor 0x1002 product 0x43a0 (rev. 0x00)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci5 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 16
re0: Unknown revision (0x2c000000)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 4
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb6 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4
pchb4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter clockinterrupt frequency 100 Hz quality 0
timecounter: Timecounter TSC frequency 2809852040 Hz quality 3000
azalia0: codec[0]: 0x10ec/0x0892 (rev. 3.2), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb6: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
uhub5 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
uhub6 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <SONY CDU4811, , PY0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(jmide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus4 drive 1: <WDC WD5000AADS-00M2B0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:1:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus1 at atabus5: 2 targets
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
uhidev0 at uhub0 port 1 configuration 1 interface 0root file system type: ffs
uhidev0: LITEON Technology USB Multimedia Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 3, iclass 3/1
ums0 at uhidev1: 4 buttons and Z dir
wsmouse0 at ums0 mux 0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)