Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2012-05-14 10:39:40
From: Sevan / Venture37
Description: HP Proliant DL140 G3 with OCZ Petrol SSD3
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz (1595.96-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 10737418240 (10240 MB)
avail memory = 10307964928 (9830 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci11: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci12: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 5.0 on pci0
pci17: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci18: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 7.0 on pci0
pci19: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci30: <ACPI PCI bus> on pcib10
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xdfa00000-0xdfa0ffff irq 16 at device 0.0 on pci30
bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
pcib11: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci31: <ACPI PCI bus> on pcib11
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xdfb00000-0xdfb0ffff irq 17 at device 0.0 on pci31
bge1: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: xx:xx:xx:xx:xx:xx
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 23 at device 29.0 on pci0
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 23 at device 29.1 on pci0
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 23 at device 29.2 on pci0
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xdfe00000-0xdfe003ff irq 23 at device 29.7 on pci0
usbus3: waiting for BIOS to give up control
usbus3: timed out waiting for BIOS
usbus3: EHCI version 1.0
usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci32: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 17 at device 2.0 on pci32
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ahci0: <Intel ESB2 AHCI SATA controller> port 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem 0xdfe00400-0xdfe007ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <OCZ-PETROL E1482585> ATA-8 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <OCZ-PETROL E1482585> ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <TEAC DW-224E-V C.CA> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 12468412 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
Trying to mount root from zfs:zroot []...
ugen2.2: <ServerEngines> at usbus2
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen0.2: <ATEN> at usbus0
ukbd1: <ATEN ATEN  CS-175854, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd3 at ukbd1
ums1: <Kb> on usbus0
ums1: 5 buttons and [XYZ] coordinates ID=0