Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2012-06-24 08:55:32
From: Marck
Description: TOSHIBA Satellite A30 (OBSD 5.1)
OpenBSD 5.1 (GENERIC) #160: Sun Feb 12 09:46:33 MST 2012
cpu0: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
real mem  = 468643840 (446MB)
avail mem = 450879488 (429MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/16/04, BIOS32 rev. 0 @ 0xfd700, SMBIOS rev. 2.31 @ 0xd6010 (31 entries)
bios0: vendor TOSHIBA version "V1.30" date 01/16/2004
bios0: TOSHIBA Satellite A30
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: wakeup devices ELAN(S3) OHC1(S3) OHC2(S3) EHCI(S3) MODM(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P2P_)
acpiprt2 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, FVS, 2793, 1596 MHz
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "PA3250U " serial 3658Q type Li-Ion oem "TOSHIBA"
acpivideo0 at acpi0: VGA_
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x800! 0xd8000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS300_133 Host" rev 0x02
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 1 int 16
drm0 at radeondrm0
ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01: apic 1 int 19, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01: apic 1 int 19, version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x17: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 20 function 1 "ATI SB200 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FA-60>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6112, 1031> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB200 ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI" rev 0x00
pci2 at ppb1 bus 2
"TI TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function 0 not configured
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: apic 1 int 19, address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: apic 1 int 16, CardBus support disabled
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 "ATI SB200 AC97" rev 0x00: apic 1 int 17
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
"ATI SB200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7321
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (ceb8b0744bc031fd.a) swap on wd0b dump on wd0b
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auixp0
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=16.63 VDC (current voltage)
hw.sensors.acpibat0.current0=0.00 A (rate)
hw.sensors.acpibat0.amphour0=4.00 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.42 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.16 Ah (low capacity)
hw.sensors.acpibat0.amphour3=3.96 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=130 (battery charging), OK